lately ive been doing a lot of reading on hybrid turbos people are running in their s4's. the thing is ive also been trying to figure out where to get specific parts and i keep running into problems. nothing is listed on the garrett website and when i called the one of the distributors they said i would need a part number and we could go from there. so heres the million dollar question: WHERE can i find the part numbers?!?!? or where else can i get the parts? i was looking at going with a t04b compressor housing and backing plate and v-trim wheel. basically i like the bnr stage2 without the pricetag. any help would be greatly appreciated.

-jason

 

What parts are you exactly looking for?

 

if you want me to be more specific than that i am not quite sure....

bottom line is i need to know where you get this kind of stuff

 

turbos_r_us on ebay

i bought exactly what you are looking for (t5/t6 trim wheel, housing, and backplate) as a kit a little over a year ago from them when i did a hybrid, for like $200 total....
i just looked and they arnt offering any right now but if you email them i am sure they have what you need

It is all garrett stuff too... that is where i get all my bearings, seals and such still
zac

http://www.cardomain.com/ride/1149659/1 look on page two... there is a good comparison of that hybrid i made to a stocker

 

thanks a lot i really appreciate it.

another question though.... i found a site http://www.powertechnologies-turbo.com that has listings of turbo parts but there are like 10 different listings for a t04b compressor housing.... so besides the part number what is the difference?

 

Im sure each housing is for each different T04B wheel they offer...

 

www.turbonetics.com they have inducer/exducer sizes, compressor maps, and sell every part seperate.

 

thanks again guys.... how good/bad of a deal is a T04B housing and backplate and v-trim wheel for $240 USD?

 

ttt

anyone???