You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX7Club.com today!
Awesome build. One Q. What is that ribbed box that your oil runs through before the coolers? On the right side of the motor in the pics.
__________________
1985 RX7 GSL, all bolt on's--SOLD
1988 Mazda 323GT--SOLD
1993 RX7 R1-SOLD To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
1991 Nissan Skyline GTS-t-SOLD
1989 Nissan Skyline GTS-4 (ATTESSA AWD/RB20DET)----SOLD
Currently Stationed at Nellis AFB, Las Vegas
So how did it go Rob?
I couldn't make it out to Homestead this weekend but I heard you were out there with the car. Everyone said it looked and sounded sweet. Did Carlos take it out for a lap or two?
__________________
CRISPEED Rx-7 9.204@150.47
TRAVIESO RACING Rx-3 10.04@130.86mph ALL MOTOR
AWD MOTORSPORTS 8.75@163EVO8 GSR E85
AD TURBO 2JZ S2000 8.69@163 E85
CHARLES/RAW 2JZ S2000 8.7213@157
BIG DADDY PERFORMANCE SUPRA's MKIII 8.70@170/MKIV 7.95@180
very nice!!!!!! i guess owning an fd requires more money than anything....lol...i currently building my fc and im having a hard time......so any numbers yet??
Yes... I know its been a while since ive been on and thanks for all the comments and responses guys!!. We finally got the car out to Homestead on September 7th for the FARA event. It was a rough beginning on saturday morning with leaking issues and a couple other small problems but we got it figured out and my partner Al and I where able to qualify the car on pole for the qualifying race on sunday. I drove the qualifying race on sunday and while in 1st place in the 4th lap we cracked a header. Causing us to qualify in last place for the race. you will see in the video that even starting in last place that car jumped 5 spots before turn one. and by lap 5 we where already in 1st place and ahead of about 3 MP2 cars. my partner spun out cause of an issue with the brakes and in the second half of the race i was able to make up 1 lap and we ended up in 3rd place. not bad for a first time shake down weekend. we will be making some changes to the car and will be out there for the next even on December 23rd. Again i want to thank my Partner in crime AL, for helping me make this project come to life. if it werent for him and his shop, this would not have been possible. I also want to thank CLR (Carlos Lopez) for building this kick ass engine for my car. awsome job!!!!! see for yourself in the video.
Still, what power is that car making and how much do you think it weighs?
__________________
Everyday i thank god for giving me my twins...turbos that is! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
car weighs about 2300 and makes 251 to the wheels right now. we need to make a couple more adjustments and add the intake stacks. we should be able to make somewhere close to 280rwhp. the torque we dont know yet cause the dyno we went to didnt measure rpm correctly
Yes... I know its been a while since ive been on and thanks for all the comments and responses guys!!. We finally got the car out to Homestead on September 7th for the FARA event. It was a rough beginning on saturday morning with leaking issues and a couple other small problems but we got it figured out and my partner Al and I where able to qualify the car on pole for the qualifying race on sunday. I drove the qualifying race on sunday and while in 1st place in the 4th lap we cracked a header. Causing us to qualify in last place for the race. you will see in the video that even starting in last place that car jumped 5 spots before turn one. and by lap 5 we where already in 1st place and ahead of about 3 MP2 cars. my partner spun out cause of an issue with the brakes and in the second half of the race i was able to make up 1 lap and we ended up in 3rd place. not bad for a first time shake down weekend. we will be making some changes to the car and will be out there for the next even on December 23rd. Again i want to thank my Partner in crime AL, for helping me make this project come to life. if it werent for him and his shop, this would not have been possible. I also want to thank CLR (Carlos Lopez) for building this kick ass engine for my car. awsome job!!!!! see for yourself in the video.
again, thanks!!
RoB
Cute Kid... Yours?...
Along with my projects I have two kids of my own... Let's not forget what's most important in our lives.... Our children!
Keep up the good work brother...
Dwayne
__________________
Weds - WANTED
1971 MAZDA R100 HOOD - WANTED
1979 MAZDA RX7 PARTS - FOR SALE
1984 MAZDA RX7 GSL - FOR SALE
1985 MAZDA RX7 PARTS - FOR SALE
1993 MAZDA RX7 WHEELS - FOR SALE
FD RACING BEAT DUAL MUFFLER - FOR SALE
NEW FD HKS DOWNPIPE - FOR SALE
nice !!!. one suggestion. put a air box for your PP engine. not just gain more HP on the engine(RAM air). also help protect engine.... IN CA... most of track are build in desert.. so is very easy to suck in those thing into the engine.....
__________________
When people ask you. why you want to spend money on the car that is more then 10 years old !!
you just told them this
"My 7s are Cheaper then BMW, Rare then the Porsche.
And Faster then a FERRARI!!" This always work in my case To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
^+1, run an airbox with a proper filter. Those screens won't properly protect the engine from grit and they disrupt the airflow into the engine and will also be providing some restriction. It's better to have a real filter further away.
i don't know if you will have the room but if you do...
remove the carb/injector airhorns. fixture an 1/8th inch aluminum baseplate bolt the airhorns back on. find the largest airfilter you can fit.... i stacked 2 in my airbox but had more room than you do. build an alum airbox around them w a plate on top removable w dzuz fasteners. plumb a couple of 3 inch air lines into the box.
you absolutely need the airfilter and what you have is restrictive.
also i don't understand the power steering on a 2300 pound racecar.
i like your adj brake bais/pedal arrangement, an absolute necessity for going fast.
Beautifull car man,..youve done a great job with it!
When is the next FARA event? It seems like they didnt have anything elese planned untill the end of the year. I was thinking of taking my car out to run with them sometime, but with nothing planned....
Finally Got the car to the Track!!!
Linear Mode
