Fd drag car project
#1
United Kingdom
Thread Starter
Join Date: Sep 2004
Location: United Kingdom
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Fd drag car project
Hi,
Will be selling as a whole or more likely breaking my fd project.
Will try and get a list together of all parts and specs. No expense spared building this.
I have had this car since 1999 and it pains me to do this but its time to move on.........for the time being anyway.
Lots of real good parts on this including mostly carbon panels, carbon seats, m&w ign system, one off tubby mani with brand new BW tubby, one off 5" to 4" full exhaust, 3 spd billet internals auto gearbox with dominello converter, every hose on car is aeroquip, wilwood drag brakes, list goes on and on
Got other parts also including another m&w ign sys, jaz ali racing seats, autometer gauges, modded fd intake.
Will put list together as soon as i get time.
Email me garygooding@btinternet .com if interested in a part. Will email back with full list.
Thx
Will be selling as a whole or more likely breaking my fd project.
Will try and get a list together of all parts and specs. No expense spared building this.
I have had this car since 1999 and it pains me to do this but its time to move on.........for the time being anyway.
Lots of real good parts on this including mostly carbon panels, carbon seats, m&w ign system, one off tubby mani with brand new BW tubby, one off 5" to 4" full exhaust, 3 spd billet internals auto gearbox with dominello converter, every hose on car is aeroquip, wilwood drag brakes, list goes on and on
Got other parts also including another m&w ign sys, jaz ali racing seats, autometer gauges, modded fd intake.
Will put list together as soon as i get time.
Email me garygooding@btinternet .com if interested in a part. Will email back with full list.
Thx
#2
United Kingdom
Thread Starter
Join Date: Sep 2004
Location: United Kingdom
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Most of the parts listed below have come off or were intended for my road legal FD drag car project here in the UK.
Most of the parts are either brand new/ test fitted only or refreshed.
Open to sensible offers on all the parts.
Rolling FD shell FOR SALE - back halved chassis by Webster Race Engineering, top front chassis rails also tube, 8.5 second SFI tag, 9" Ford axle, brand new paint job in carbon grey, carbon front wings, wilwood front brakes, suspension , axle, wheels, fuel tank, fuel lines, full 4" custom exhaust exiting at back, ali door panels, dash, fuel system cover..........POA
Seibon carbon doors for FD – never used on car only test fitted - £1100 pair
Reverie X C twin skin carbon seats with FD mounting frames/ seat pads -£1200 (seats are £1200 each new)
RE-A vented Type B headlights for FD – not many of these about - £600
Borg Warner S475 turbo kit
98mm rear wheel/ 1.10ar rear housing/ T6 flange – brand new never run, custom manifold with no wastegate runners, 5” to 4” downpipe, turbo mount and support. Some welding required to mount turbo support )- amazing workmanship and quality - £2750
M&W PRO DRAG 4R ignition system with 4 x MSD coils (4 channel) – hardly used - £1000
M&W single channel ignition system with M&W coil (twin output to run leading only) - £175
Extreme rotaries Gilmer drive kit to go with side mount alternator, electric water pump – test fitted only £100 (PULLEYS AND BELT ONLY)
C4 auto gearbox/tranny built by the best – Andy Frost UK – billet valve body, custom mods and parts/ 13b bell housing - £1800
B&M shifter - £100
Tony Dominello converter build to spec for 900hp 13b – 7000rpm stall with gas - £750
Starter for above - £50
Modified REW intake with 4 x injector bosses in UIM/ LIM injector holes welded up. (Came off Grump 2 old 13b set up) - £75
HKS boost gauge ( up to 2 bar) - £50
Carbon FD sill covers brand new still wrapped £90
Carbon FD sill covers, one with slight damage to gel coat £70
Most of the parts are either brand new/ test fitted only or refreshed.
Open to sensible offers on all the parts.
Rolling FD shell FOR SALE - back halved chassis by Webster Race Engineering, top front chassis rails also tube, 8.5 second SFI tag, 9" Ford axle, brand new paint job in carbon grey, carbon front wings, wilwood front brakes, suspension , axle, wheels, fuel tank, fuel lines, full 4" custom exhaust exiting at back, ali door panels, dash, fuel system cover..........POA
Seibon carbon doors for FD – never used on car only test fitted - £1100 pair
Reverie X C twin skin carbon seats with FD mounting frames/ seat pads -£1200 (seats are £1200 each new)
RE-A vented Type B headlights for FD – not many of these about - £600
Borg Warner S475 turbo kit
98mm rear wheel/ 1.10ar rear housing/ T6 flange – brand new never run, custom manifold with no wastegate runners, 5” to 4” downpipe, turbo mount and support. Some welding required to mount turbo support )- amazing workmanship and quality - £2750
M&W PRO DRAG 4R ignition system with 4 x MSD coils (4 channel) – hardly used - £1000
M&W single channel ignition system with M&W coil (twin output to run leading only) - £175
Extreme rotaries Gilmer drive kit to go with side mount alternator, electric water pump – test fitted only £100 (PULLEYS AND BELT ONLY)
C4 auto gearbox/tranny built by the best – Andy Frost UK – billet valve body, custom mods and parts/ 13b bell housing - £1800
B&M shifter - £100
Tony Dominello converter build to spec for 900hp 13b – 7000rpm stall with gas - £750
Starter for above - £50
Modified REW intake with 4 x injector bosses in UIM/ LIM injector holes welded up. (Came off Grump 2 old 13b set up) - £75
HKS boost gauge ( up to 2 bar) - £50
Carbon FD sill covers brand new still wrapped £90
Carbon FD sill covers, one with slight damage to gel coat £70
Thread
Thread Starter
Forum
Replies
Last Post