sen2two

iTrader: (10)

I have seen a few rx7s with these set ups locally. I'm looking to use this set up myself in my drag car. But I can not find any real info on which Doug bash tranny is used in this set up. Anyone here used this set up want to chime in and clue me in?

sk8world

iTrader: (5)

Send your Doug Nash tranny off to Liberty for face plating, get a vertigate shifter. Just call Paul at Liberty for more info.

13B-RX3

iTrader: (2)

I am running a DN in my RX-3. As far as the tranny goes i can tell you anything you wan't to know.

sen2two

iTrader: (10)

Your going to have to start with the basics or me...lol. I'm not really even sure on which Doug Nash tranny to use or what will even work. I found a few 4+1 and 4+3 trannys. I think they are both from c4 corvettes. Are these the one I should be looking at? Or should I be looking for a 5 speed DN tranny?

Where to get a bell housing adapter, what bell housings to use, clutch/flywheel combos, ect...

Any info here would be great, since I am basically oblivious to DN trannys. didnt even know they were being used until recently. lol...

13B-RX3

iTrader: (2)

The 4+1 is what you want. stay away from the 4+3 and the Richmond Street trans (they look very similar to the 4+1). The 4+1 is actually a 5 speed. Gforce sells the adapter and the input shaft you will need. I would suggest using a TII bellhousing and stock flywheel. All you need for a clutch is a good pressure plate and a sintered iron disc to match the spline of the input shaft.

Here are a couple pics for you.
https://www.rx7club.com/showthread.p...ighlight=shiny

I would also recommend sending it to liberty's to have them do the face plate mod. It shifts MUCH better after this is done!

sen2two

iTrader: (10)

THANK YOU!!!

I been googling my *** off and couldnt find any real info. Just a bunch of hot rodders and old school V8 guys using them.

So now i am on the hunt for a 4+1. but, I did however find a 5 speed doug nash locally for a decent deal. Already has an inline shifter on it. (the 5th gear is not an overdrive and has a 1:1 ratio). The guy told me it was on a circuit car originally and was an aftermarket tranny. Not a factory trans originally and it was before Richmond. Would this be just as good as a 4+1? or stick to the 4+1?

13B-RX3

iTrader: (2)

The 4+1 is a five speed with a 1:1 5th gear. As far as i know DN didn't make any race transmissions beside the 4+1. I would be skeptical of the trans locally. A circuit car shouldn't have an inline shifter. Get a pic of it and i can tell for sure. There are still TONS of parts for these transmissions out there you just have to know where to look.

13B-RX3

iTrader: (2)

How much are you looking to spend? Will the car ever be driven on the street?

sen2two

iTrader: (10)

I got the guy to send me some pictures of the tranny. I'll be able to post them tomorrow hopefully.

I'm not really sure what I'm looking to spend, I guess it would depend on the quality of the transmission in what it came with. this is for my all motor drag car, it will never see the street.

sen2two

iTrader: (10)

Heres some shots o it...

13B-RX3

iTrader: (2)

Holy ****, did that thing come out of a boat? That is an "H" pattern shifter not an inline, not the best for drag racing. The one thing i need to see if it is the race or street box is not in the pic. Do you have a picture of the drain plug side of the case that is zoomed out a little? Also does it have a place to put a speedometer drive?


Edit: I am about 95% sure that is a street trans and not the pro shifted race trans. See if you can get pics of the other side.

teddyrx2

iTrader: (33)

There is a guy on the net that is selling a doug Nash 4+1 5 speed on the net with the bell housing, he states the tranny is alread set up for turbo/nos applicated drag car, everything on the inside has been refreshened...Check him out

I have a TII bell housing for sale right now if your interested...Its for sale Let me know...

scirotor

here is a doug nash 4+1 on racingjunk.com
http://www.racingjunk.com/category/0...llhousing.html

sen2two

iTrader: (10)

Thanks, I'll see if I can get some pics of the other side. I think it is an in line shifter bit has an H pattern shift ****. I'll clarify with a guy first. but if it doesn't turn out to be the street transmission, I will not be buying it anyway.

sen2two

iTrader: (10)

that's basically everything I need all in one, seems perfect. sounds like the same one teddyrx2 seen also.

13B-RX3

iTrader: (2)

The inline shifter will have some sort of lever to pull it up to the 1-2 gate. That is definitely a "H" pattern.

teddyrx2

iTrader: (33)

Yup that's the guy selling the DN 4+1 for $2g's and it comes with the bell housing, I don't see it in the picture lol, but he say's it come with the sale...

scirotor

here are some more pics... the owner send it to me last night

13B-RX3

iTrader: (2)

Why can't i find this ad without the link?

scirotor

This ad expired 6 days ago.

teddyrx2

iTrader: (33)

when i found it, I was using google and it popped up...

Where or what car do these Doug Nash Tranny's come out of?

sen2two

iTrader: (10)

I'm looking to work a deal for that one right now. But I still have my eye on the local trans because its much less expensive.

13bRx3 - The local DN trans did not come with a speed drive. He also told me it does have an H pattern shifter on it, but he has the inline shifter for it. He is getting me the other picture hopefully by tonight.

Trots*88TII-AE*

iTrader: (11)

Seriously, if I was anywhere near that DN in Hollywood I would jump on it. How much will the adapter plate and Mazda input shaft alone cost? Seems like a good deal, and they already come pro-shifted so you could always wait to get it face-plated in the future. That other one doesn't look like it's been stored too well either...

teddyrx2

iTrader: (33)

Somebody anybody? Where or what car are these transmission found? what car?

13B-RX3

iTrader: (2)

They didn't come factory in any car. They are an aftermarket racing trans that is no longer made.