exhaust manifold q's
#1
Junior Member
Thread Starter
exhaust manifold q's
few questions
looking to find out what diameter 321 stainless steel pipe you would use on a p-port turbo engine? 2 inch? 2.5?
also what thickness should be used?
thanks
looking to find out what diameter 321 stainless steel pipe you would use on a p-port turbo engine? 2 inch? 2.5?
also what thickness should be used?
thanks
#3
Rotary Freak
If you're talking pipe, only seen schedule 5 and 10, although you'd think 40 must be out there somewhere...so I'd go with the thicker of the two.
If you mean tube only ever seen 16 gauge, so that's pretty much where you end up.
Exhaust port is somewhere around 51 or 52 mm on a 13b from memory, 2" sounds good there to me!
If you mean tube only ever seen 16 gauge, so that's pretty much where you end up.
Exhaust port is somewhere around 51 or 52 mm on a 13b from memory, 2" sounds good there to me!
Thread
Thread Starter
Forum
Replies
Last Post