Power FC Need Map. stock port, t04z, 550/1600 combo.
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2013
Location: okinawa
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Need Map. stock port, t04z, 550/1600 combo.
I will pay for a map. Stock pump with a 550/1600 injector combo. Tuned a car with this setup? Have a good running car with this setup? understand nobody wants to be responsible if i burn up a motor. I get it. This is just to get a good start. And i will not hold you responsible if something goes wrong. Paypal ready. I know this is a common setup someone has got to have a good map.
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes
on
66 Posts
My 13b-REW engine has blue printed intake and exhaust ports, with a slightly modified TB.
Stock 550 primaries, and Bosch 1600 secondaries driven by a low impedance driver.
It has a Koyo "N" pass radiator and Blitz FMIC.
For the stock 2 bar map sensor, I have a map at 40psi base fuel pressure for running up to 16 psi boost on gas.
For the Apexi 3 bar map sensor(current setup) , I have a map at 50 psi base pressure for running up to 16psi on gas, and water/meth at 18 psi.
The turbo is a GT3582R.
PM me and lets talk by email.
Stock 550 primaries, and Bosch 1600 secondaries driven by a low impedance driver.
It has a Koyo "N" pass radiator and Blitz FMIC.
For the stock 2 bar map sensor, I have a map at 40psi base fuel pressure for running up to 16 psi boost on gas.
For the Apexi 3 bar map sensor(current setup) , I have a map at 50 psi base pressure for running up to 16psi on gas, and water/meth at 18 psi.
The turbo is a GT3582R.
PM me and lets talk by email.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM