efranklin

looking for a map... mods are in my sig.. also the pfc wont go up to 1600cc in the injectors settings, how do i fix this?

kenn_chan

you need a datalogit to change your injector size up above 12 or 1300 cc not sure which, you will also need the data logit to load a map properly. any map you get could have changes made to the baser map (which you cannot access without datalogit) this can easily destroy your engine.

matter of fact if you get a map for 1600cc secondaries and do not have the capability of changeing all of the settings (datalogit required) I would bet a months pay that you will blow the engine before a week is up.

not flamin ya, just stating facts.... first research second get a datalogit and a wideband, third research some more..

best of luck

kenn

PhDMDRX7

You don't need a new map you need a tune. You cannot take full advantage of your mods without a real tune on a dyno. by a competent tuner. Don't risk blowing up your engine by fooling with the settings. My guess is that simply changing the secondary injector setting to 1600 cc will result in the engine running very rich (i.e., safe) but not giving you anywhere near the hp that you installed them for.