PFS PMC mounting platform for PFS PMS
#1
VIP - Very Irish Person
Thread Starter
Join Date: Jan 2002
Location: NC State
Posts: 1,458
Likes: 0
Received 0 Likes
on
0 Posts
mounting platform for PFS PMS
Does anybody have a mounting stand/platform that they use for their PFS PMS ecu? I am sick of stuffing the damn thing in the glovebox. Has anybody fabricated their own? If so, i'll pay to get another one made.
#2
Senior Member
Join Date: May 2002
Location: Frisco, TX
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Hey Taylor,
The instructions for the PMC detail how you can remove the passenger seat, lift up the carpet, remove some sound insulation and place the ECU under the seat. However, you'll probably find that the seat won't be able to go all the way back after that. If you don't mind limiting the seat travel a little, that method works fine. You can download the instructions from Peter Farrell's website.
I got rid of my PMC for a PFC, but in hindsight, I'd probably just try to zip tie or velcro the PMC under the dash somewhere. You should have enough cable to run it under the carpet and attach the unit around the tranny tunnel.
Mark
The instructions for the PMC detail how you can remove the passenger seat, lift up the carpet, remove some sound insulation and place the ECU under the seat. However, you'll probably find that the seat won't be able to go all the way back after that. If you don't mind limiting the seat travel a little, that method works fine. You can download the instructions from Peter Farrell's website.
I got rid of my PMC for a PFC, but in hindsight, I'd probably just try to zip tie or velcro the PMC under the dash somewhere. You should have enough cable to run it under the carpet and attach the unit around the tranny tunnel.
Mark
#3
VIP - Very Irish Person
Thread Starter
Join Date: Jan 2002
Location: NC State
Posts: 1,458
Likes: 0
Received 0 Likes
on
0 Posts
hey, that is actually where I have mounted the box. In the question I guess I meant to include that I am talking about the handheld device. I meant where could I put it?Im talking something along the lines of the apexi PFC holder which has a little stand that can connects to the dash.
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
SakeBomb Garage
0
09-04-15 05:20 PM
SakeBomb Garage
Vendor Classifieds
0
09-04-15 05:19 PM