amemiya rules

iTrader: (2)

engine is back in, going to finish the headers and exhaust in a day or 2

amemiya rules

iTrader: (2)

Engine and intake are on, having the headers finished as well as the exhaust

amemiya rules

iTrader: (2)

headers done

amemiya rules

iTrader: (2)

more work on the exhaust, multiple slight bends, trying to keep it as close to the car as possible. Going from round to oval and then back to round.

AuthoritySucks

iTrader: (7)

is going to be a monster.
The first gen (granny speed shop) read diff bolts directly up to the stock rx3 rear? So simple!!

amemiya rules

iTrader: (2)

i'm not sure how easy or hard it is going to be to attach the grannys 1st gen rear, thats why i am leaving it all up to my fabricator. Hopefully it is an easy install. I just need gslse rear brakes to finish it off.

papsmagu

iTrader: (19)

that header !!!!! WOW

amemiya rules

iTrader: (2)

i got my new coilovers today from techno toy tuning. also had ne of the muffles cut down to fit inside the exhaust tube for the side exhaust

amemiya rules

iTrader: (2)

i also got the front fenders off and test fit the fiberglass ones from Canada. they need quite a bit of work.

amemiya rules

iTrader: (2)

i also helped to remove the rear axle to get ready for the grannys ford 8.8 to be put in, hopefully tomorrow

fritts

iTrader: (5)

Those the ones on ebay?

amemiya rules

iTrader: (2)

yes, fenders are from ebay, they are nice but need fitment work, some hols not lined up, and some holes not there

amemiya rules

iTrader: (2)

more progress, the rear shock towers are opened up to fit the coil overs, and the rear is almost bolted in.

amemiya rules

iTrader: (2)

wheels and tire, just plasti dipped them flat black with vht yellow, same as the engine
13x10 all around

amemiya rules

iTrader: (2)

more exhaust work, almost done

boostdtalon

Tito and Eddie do some awesome work.

amemiya rules

iTrader: (2)

I got the rear brake rotors today, and the exhaust is finally all welded up. All the work has been done by Tito Garrido and Joe Libby at Renown Racing. Still have to do the 3 link rear and cut the body for the fender flares

boostdtalon

Yeah it is some awesome work for sure. I've been following your build on here and I see some of the pictures that Tito posts on FB.

73rx313b

iTrader: (40)

Are your Wheels gonna fit over those brakes? hard to tell from the pics but the brakes look pretty big.... you said your wheels were 13's??? may have some issues???

amemiya rules

iTrader: (2)

With the wheel spacers they should fit, if not i have a set of 16x9 volk artisan fins i will use

73rx313b

iTrader: (40)

those look cool... I have a set like that too but mine are Enkei's

amemiya rules

iTrader: (2)

here is a quick mock up of the fender flares

boostdtalon

That looks awesome!

amemiya rules

iTrader: (2)

a few more updates

amemiya rules

iTrader: (2)

and some more