Work Begins on the RX-2
#3
Junior Member
Join Date: Feb 2006
Location: Lancaster, Ca
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
rx2 radiator, and misc parts, also rx3 front bumper
radiator in good shape and i have other misc parts also i have two rx3 front bumpers in pretty good shape hit me at 661-726-3366 for more info.
#5
What Subscription?
Thread Starter
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
Fixed the hood yesterday, well at least for the time being. Used a 3M 2 Component foam to adhese the frame back to the sheetmetal. No more straps across the hood and no more fluttering hood!
Trending Topics
#8
What Subscription?
Thread Starter
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
My 73 Mazda RX2 has been languishing under a Tarp and carcover for 18 months. Took it off the road to fix some rot around the windshield. Well, between building the new house, selling the old house and not having a finished shop it has been neglected by your truely .
LAst month it was sunny so I removed the covers and got it started. Went to move it and the clutch hydraulics were shot.
Today I came home, pulled the clutch master and fitted a rebuild kit in it. Bled and works great, total elapsed time ~ 45minutes.
Fired her up, let the fluids warm up and down the street for a quick 70mph blast with no windshield. ABSOLUTELY FANTASTIC!!!!!!!!
Now to break out the metal working tools and devote some time to repairing the rot properly
Poorly performed repair (on car when purchased) and new rot on Drivers side
Rot on Passenger side
LAst month it was sunny so I removed the covers and got it started. Went to move it and the clutch hydraulics were shot.
Today I came home, pulled the clutch master and fitted a rebuild kit in it. Bled and works great, total elapsed time ~ 45minutes.
Fired her up, let the fluids warm up and down the street for a quick 70mph blast with no windshield. ABSOLUTELY FANTASTIC!!!!!!!!
Now to break out the metal working tools and devote some time to repairing the rot properly
Poorly performed repair (on car when purchased) and new rot on Drivers side
Rot on Passenger side
Last edited by banzaitoyota; 02-16-11 at 10:10 PM.
#9
GET OFF MY LAWN
iTrader: (1)
Damn, a pile of dust hit my keyboard when the thread opened!
I was just working on my back window with the same issue a few nights ago. I made two pieces to replace the whole lower edge but I only had my phone with me and it takes crappy pics. I've gotten pretty good with my shrinker/stretcher combo and I have a good friend that has a bunch of metal brakes and other goodies to convince steel into different shapes.
Let's see who can keep their thread the highest with updates!
I was just working on my back window with the same issue a few nights ago. I made two pieces to replace the whole lower edge but I only had my phone with me and it takes crappy pics. I've gotten pretty good with my shrinker/stretcher combo and I have a good friend that has a bunch of metal brakes and other goodies to convince steel into different shapes.
Let's see who can keep their thread the highest with updates!
#15
What Subscription?
Thread Starter
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
Here is a real crappy pic I snapped with the camera today. I had company all weekend and didnt get to play "cars"; I had a good time with my kids and grandkids coming over
#17
What Subscription?
Thread Starter
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
Got the new shrinker today, its a modified Harbor freight unit with "stippled" dies versus the standard serrated dies (doesn't tear the metal up as much.
#19
What Subscription?
Thread Starter
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
Started taking the dash out for access to the cowl area; found a rust breeder site! Pics tomorrow when I have better light. Also started mocking up locations for the mastercell and powercells for the ISIS System
#21
What Subscription?
Thread Starter
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
The rest of the ISIS system has arrived. Unfortunately I have to fly to Chicago this weekend AND work piled on another proposal I have to do the conceptual design on. Hopefully next weekend I can spend some time with the Duece
#24
Senior Member
#25
GET OFF MY LAWN
iTrader: (1)
During the restoration of an Alfa GTA vintage race car we smoothed out the cracked dash, filled in cracks with expanding foam, and recovered it with motorcycle seat vinyl. It stretches in all directions so it is easier to keep it from getting bunched up.
The GTA dash is very similar to the RX2's in shape and how it attaches. Do an image search for "Bob Lee Alfa". I helped finish the car for the Amelia Island Concours a couple years back, a good friend of mine did the complete, correct restoration of the Kwech driven 1966 Trans Am championship winning car.( I think he's up to 11 GTA's restored now)
The GTA dash is very similar to the RX2's in shape and how it attaches. Do an image search for "Bob Lee Alfa". I helped finish the car for the Amelia Island Concours a couple years back, a good friend of mine did the complete, correct restoration of the Kwech driven 1966 Trans Am championship winning car.( I think he's up to 11 GTA's restored now)