S5 front brakes on GSL-SE

NES12A · 01-15-09, 06:39 PM

How do i swap 2nd gen brakes onto my gsl-se?Do i need to change the rotors too?

Aaron Cake · 01-16-09, 01:42 PM

You need to make caliper mounting brackets, redrill the rotors for 4 lug and make a spacer to go between the rotor and the hub. So the answer is, you need to change everything.

RotaryNewbei · 01-16-09, 09:03 PM

CP Racing had a kit that allowed the 2nd gen hud to bolt to the GSL-SE hub, with a bracket for the four piston caliper. I bought that kit and modified it to use 93 rotors and calipers.

GORacing · 01-16-09, 10:25 PM

GSL-SE's already have the same bolt pattern and brakes as the 4 lug 2nd gens, but if you want to change over to the 2nd gen alum hubs or change to the 5 lug, 4 piston calipers and larger rotors then RE Speed ( http://www.mrcmfg.com/catalog/ ) has the kits for doing fronts, rears, as well as change over axles for the 5-lug conversion... plus other upgrades...