New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

RX7 FD3S 13b engine problems / stalls / rough idle and running rich

Thread Tools
 
Search this Thread
 
Old 04-12-12, 06:38 AM
  #1  
Can Post Only in New Member Section
Thread Starter
 
tscheuneheuner's Avatar
 
Join Date: Apr 2012
Location: GE
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Exclamation RX7 FD3S 13b engine problems / stalls / rough idle and running rich

Hi,

iīve an 94 RX7 FD3S 13b. Itīs not running right at the moment. Bought it from a member of here in october and it was running fine when i was driving back to germany. after the import it was sitting in the garage till last week. i tried the engine and itīs running really rough with a lot of smoke (unburned fuel). Soundīs that its running on only 1 rotor. after trying a few times it now stalls and the plugs are wet. i reset the pfc but same problem. iīve checked the idle speed control and the throttle sensor.

here is the link: http://www.youtube.com/watch?v=PJpYL...feature=relmfu

its an single turbo with these specs:

Large street port
Hks t04 single turbo
Wastegate
Hks evc
Apexi power fc with commander
Fmic
Walbro fuel pump
Old 05-24-12, 09:44 AM
  #2  
Junior Member
 
Julzilla's Avatar
 
Join Date: Nov 2010
Location: Geelong, Victoria, OZ
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
sounds like your plugs are fouled up. Try replacing/cleaning them and try firing it up, you do have it ported so you will foul plugs up alot of it doesnt get driven heaps.

Does it rev smooth or does it sound choppy?
Old 06-01-12, 04:49 PM
  #3  
Junior Member
 
all rotor's Avatar
 
Join Date: Feb 2010
Location: caribbean
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
If that doesn't work , do not rule out damaged injector o-ring .
Had this problem and an o-ring on the #1 secondary injector was the problem .
Old 06-04-12, 12:03 PM
  #4  
Junior Member

 
themadsupra's Avatar
 
Join Date: Apr 2003
Location: idaho
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
I would second taking a look at the plugs as the first culprit
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
82streetracer
Haltech Forum
11
03-11-19 05:34 PM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM



Quick Reply: RX7 FD3S 13b engine problems / stalls / rough idle and running rich



All times are GMT -5. The time now is 11:19 PM.