RX7 FD AC re-install
05-27-16, 04:02 PM
#1
Junior Member
Thread Starter
Join Date: May 2016
Location: new brunswick
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RX7 FD AC re-install
I searched around and couldn't find a thread about this.. if there is one out there could someone please direct me to it.
The guy I bought my car from removed the AC compressor, lines, drier... and I really want to put it back in. it's not a track car, and it's black. it gets really hot.
I was just wondering if anyone has a diagram of how everything is supposed to be set up?
the condenser and evaporator are still in the car.. here's a pic of the parts that are removed
any advice about how it all goes back together would be greeeat
The guy I bought my car from removed the AC compressor, lines, drier... and I really want to put it back in. it's not a track car, and it's black. it gets really hot.
I was just wondering if anyone has a diagram of how everything is supposed to be set up?
the condenser and evaporator are still in the car.. here's a pic of the parts that are removed
any advice about how it all goes back together would be greeeat
05-28-16, 07:51 PM
#3
Junior Member
Thread Starter
Join Date: May 2016
Location: new brunswick
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I couldn't find it in the fsm... then realized there was a separate manual for the electric system that has the heating and AC in it... helps a lot - thanks
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Gen General Discussion
8
09-13-16 04:43 PM
rx7rally
New Member RX-7 Technical
8
03-22-16 12:23 AM