Oil ventilation lines
#1
Junior Member
Thread Starter
Join Date: Aug 2015
Location: CT
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Oil ventilation lines
I'm reinstalling a carbed 13B and it's got two tubes coming off the oil fill neck. Previously, these were just open and uncapped, and some oil would come out, with no other problems. I am hoping to route them back to the intake manifold, probably with a PCV valve inline like on many other cars. My question is: why are there two of them? What do I do with the other tube?
#3
Junior Member
Not OP but the 12a in my '83 FB had two fittings. One on the filler neck and one in the cast center iron maybe 2" below. I capped the lower one off and attached the PCV to the upper fitting.
#5
Junior Member
#6
Moderator
iTrader: (3)
yeah, that's what i'm familiar with as well. however, i've been around long enough to try not to take certain things for granted when someone asks certain questions, so i just wanted him to clarify is all. there are some parts out there that i've never laid eyes or hands on and i like to try to keep that in mind.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM