Logicon/Climate Control Stopped Working Completely
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Location: MD
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Logicon/Climate Control Stopped Working Completely
Hey guys, so today I noticed that my Logicon/climate control stopped working completely. Just a week ago it was fine, lit up, heat came on, etc. The other day I was going through my fuse box and replacing any fuse that was incorrect, because the previous owner had some that were too large. That same day I also unplugged the aftermarket headunit he had put in, because I believe it was blowing the 7.5a ROOM fuse.
I noticed the logicon issue today, so I'm thinking maybe when I disconnected the stereo or replaced fuses I messed something up? I tried reconnecting the stereo today to see if that was related but I plugged it in and before I could even try I noticed the fuse had blown. The stereo operated but the door lights and clock were out. No change with the logicon.
Any ideas here? I find it odd that it would entirely stop working, lights and all.
I noticed the logicon issue today, so I'm thinking maybe when I disconnected the stereo or replaced fuses I messed something up? I tried reconnecting the stereo today to see if that was related but I plugged it in and before I could even try I noticed the fuse had blown. The stereo operated but the door lights and clock were out. No change with the logicon.
Any ideas here? I find it odd that it would entirely stop working, lights and all.
#2
Junior Member
Thread Starter
Join Date: Sep 2014
Location: MD
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Just to update this thread, I noticed on my way to work this morning with my headlights on that the logicon does in fact illuminate fine. It still wasn't working however, until randomly on my drive in today it kicked on and the fans and heat worked. It stopped working again when I left work later. So I'm starting to think it's a solder issue. I ordered a used logicon in the meantime so I can test that as well, and possibly resolder my stock one.
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
pop the logicon out of the dash by removing the 4 screws that hold it into the dash.(pull gently)
There is 2 connectors to that logicon and I am betting one is loose.
There is 2 connectors to that logicon and I am betting one is loose.
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM