Injector plug connector adapter
05-03-15, 02:22 PM
#1
Full Member
Thread Starter
Join Date: Feb 2015
Location: Italy
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Injector plug connector adapter
Hello, I got an S4 with square injector plugs and adapter.
Sadly I accidentally bought oval injectors (impedance is the right one), does anyone know where I can find the right plug and play adapter and if its possible to just adapt them, or is there a wiring difference?
Thanks in advance
a very stupid Alex
Sadly I accidentally bought oval injectors (impedance is the right one), does anyone know where I can find the right plug and play adapter and if its possible to just adapt them, or is there a wiring difference?
Thanks in advance
a very stupid Alex
05-03-15, 03:56 PM
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Just watch that the Tab is in the right spot on the square section.
Some injectors are Offset tab and some are center notched tab.
That of course can tell you exactly what injector you are using too,as HI imp uses an Offset tab on the S4 N/A.
Make sure the impedance is correct.
IF So,then you have the choice to either adapt the harness using some plug in adapters to go from square to oval...OR just do a little wiring and change the connectors out.
(mark the Wires!..L1,L2.T1,T2.or you will have some fun..wunderin'..lol!..)
I think I got my adapters from Full Function Engineering (vendor in Forum)
You can also try Keith at www.injector-rehab.com
Some injectors are Offset tab and some are center notched tab.
That of course can tell you exactly what injector you are using too,as HI imp uses an Offset tab on the S4 N/A.
Make sure the impedance is correct.
IF So,then you have the choice to either adapt the harness using some plug in adapters to go from square to oval...OR just do a little wiring and change the connectors out.
(mark the Wires!..L1,L2.T1,T2.or you will have some fun..wunderin'..lol!..)
I think I got my adapters from Full Function Engineering (vendor in Forum)
You can also try Keith at www.injector-rehab.com
Last edited by misterstyx69; 05-04-15 at 08:13 PM. Reason: edited Website (Kgparts)
05-04-15, 04:18 AM
#3
Full Member
Thread Starter
Join Date: Feb 2015
Location: Italy
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Can't really express how thankful I am, you really saved me on my project!
I hope to get the car running soon!
Love this comunity and hope to be able to contribute too some day.
Alex
I hope to get the car running soon!
Love this comunity and hope to be able to contribute too some day.
Alex
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
86rxNa
2nd Generation Specific (1986-1992)
2
08-11-15 11:51 AM