Help me with my bumper please
#1
Junior Member
Thread Starter
Join Date: Dec 2015
Location: Denmark
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Help me with my bumper please
okay guys i think this is a autoshine type 1 halfbumper, but correct me if im wrong. FC3S RX-7 Misc. Items | Shine Auto Project
but as u can see in the pictures of the link, that bumper seems very thin, and its twisting. i have heard that some people are pop riveting the half bumper on top of their original bumper, and then shave it out... is that for real? is it really that thin? or can i get a complete bumper that looks like the one on the first picture, that is replacing my original one? please help me im desperate to know... thanks
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
That Half bumper is just that.
It installs below the so called moulding of the original bumper.OVER the original bumper.
It does not replace the bumper.
You can use a Strong double sided tape to install it (3M outdoor tape) or use yer noodle to make it work..Ya like rivet it or screw it on.
I used a Industrial Velcro and installed my half bumper.
It installs below the so called moulding of the original bumper.OVER the original bumper.
It does not replace the bumper.
You can use a Strong double sided tape to install it (3M outdoor tape) or use yer noodle to make it work..Ya like rivet it or screw it on.
I used a Industrial Velcro and installed my half bumper.
Thread
Thread Starter
Forum
Replies
Last Post
photoresistor
3rd Generation Specific (1993-2002)
5
01-05-16 11:27 AM