New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

have to heel toe at stops?!

Old 07-25-14, 11:10 PM
  #1  
Junior Member
Thread Starter
 
RotaryFormulaD's Avatar
 
Join Date: Mar 2014
Location: hamilton ohio
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
have to heel toe at stops?!

88 turbo II
Basic mods
Idle is 1500-2k
Under wot noise intensifies seems near under the radio area tranny?
Anyway problem is i have to heel toe and blip the throttle when coming to a stop.
Also. Is there a maintence thread for turbo 2's searched but couldnt find. Thanks for any help guys.
Old 07-25-14, 11:21 PM
  #2  
Retired Moderator, RIP

iTrader: (142)
 
misterstyx69's Avatar
 
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes on 114 Posts
You will have to be more specific in your description.
(my car has noise under the radio at WOT.it is the wastegate opening up!)

What kind of noise do you hear?.grinding,moaning.exhaust?..

Has the car had the "emissions deleted"?
The car is suppose to idle at roughly 750-1000..so 1.5 to 2k is too high.
Old 07-26-14, 01:19 AM
  #3  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,807
Received 305 Likes on 265 Posts
regarding the high idle and having to artificially maintain engine speed when stopping, check for a vacuum leak.
Old 07-26-14, 06:22 PM
  #4  
Junior Member
Thread Starter
 
RotaryFormulaD's Avatar
 
Join Date: Mar 2014
Location: hamilton ohio
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Now it wont turn over
And yes full emissions delete.
And it sounds like something is bouncing off **** and increase as the rpms increase kimda like a bb hitting metal sheet.
Grounds good. Got charge. Af ratio decent rich as hell but idle is terrible. It dosnt even idle. It will start going up to 2 then drop then stay at 1500 then after 5 seconds repeat back up to 2
Old 07-26-14, 07:40 PM
  #5  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,807
Received 305 Likes on 265 Posts
get a compression test. short of that, pull the plugs and turn it by hand. see how many pulses you get.
Old 07-28-14, 05:37 PM
  #6  
Junior Member
Thread Starter
 
RotaryFormulaD's Avatar
 
Join Date: Mar 2014
Location: hamilton ohio
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
The motor is fine it revs all the way and is fast as hell it just dies when i come to a stop so i downshift through all gears and heel toe to a stop...i did hit a bump and i think my oil pan has a big dent or its the desighn ....
Old 08-13-14, 10:59 AM
  #7  
Hey...Cut it out!

iTrader: (4)
 
Akagis_white_comet's Avatar
 
Join Date: Dec 2007
Location: St Louis, MO
Posts: 2,067
Received 291 Likes on 190 Posts
A dented oil pan would not cause these issues as it is essentially a separate chamber from the rest of the engine.

As Diabolical1 said, this sounds like an Air/fuel issue and with the searching idle, my gut is saying vacuum leak. Grab some carb cleaner and spray around each intake gasket while listening carefully for changes in idle. If you're running too rich, it will most likely stumble and try to stall as the carb cleaner behaves like fuel when introduced into the intake at a leaky joint.

If you've not already done so, do a compression test. It is the tell-all crystal ball for our engines
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rotafuzz
New Member RX-7 Technical
3
09-30-15 09:55 AM
SSpyderX
1st Gen General Discussion
0
09-29-15 04:37 PM


Thread Tools
Search this Thread
Quick Reply: have to heel toe at stops?!



All times are GMT -5. The time now is 05:17 PM.