Air adjust screw stuck on my se
#1
Junior Member
Thread Starter
Join Date: May 2015
Location: Phoenix, AZ
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Air adjust screw stuck on my se
I have low idle on my 85 SE after warm-up. I have adjusted the throttle position sensor per the fsm. The air adjust screw will not budge. Any ideas? Thanks!
#2
Senior Member
iTrader: (2)
Join Date: May 2013
Location: Los Angeles
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the wonderful world of trying to get an SE to idle correctly. There are quite a few things that can affect the idle on these first gen EFI's. BAC (used to maintain idle) and the Air control valve, ECU, TPS, Vacuum Hoses, Shutter Valve, Air Flow Meter. Check everything...
#3
Junior Member
Thread Starter
Join Date: May 2015
Location: Phoenix, AZ
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! I was finally able to get the air screw to work after using some penetrating oil and some patients. I took the MAF out and found a bunch of crud in it while I was waiting. All back together now and is idling much better.
Thread
Thread Starter
Forum
Replies
Last Post
FD3S_wanted
Suspension/Wheels/Tires/Brakes
4
09-22-15 06:18 PM