Fuel Injector Plug Kit
#1
I'm awesome
Thread Starter
Join Date: Jan 2011
Location: Albuquerque NM
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Injector Plug Kit
Hey Guys my first real thread on here. I have a 88 FC vert with a N/A 13b
I ran into a guy that built rotaries for some years and he was telling me to remove the secondary injectors and use a fuel injector plug kit form mazda trix to give me some more HP and throttle response. I've been searching and haven't found much merit on this mod and was wondering if there is any truth to it..thanks
I ran into a guy that built rotaries for some years and he was telling me to remove the secondary injectors and use a fuel injector plug kit form mazda trix to give me some more HP and throttle response. I've been searching and haven't found much merit on this mod and was wondering if there is any truth to it..thanks
#2
Old [Sch|F]ool
The injector plug kit is for the primary side, when installing a carburetor or throttle body style fuel injection. It won't fit the secondaries.
Also, why would you even want to do this? It makes no sense.
Also, why would you even want to do this? It makes no sense.
#4
Rallye RX7
iTrader: (11)
Don't spend the 130 dollars or whatever it is. Get some good orange sealant, then get a freeze plug and drive it down into the injector seat.
cost you about 4 dollars.
and yes you're not using an S3-S6 manifold for carb so this only applies to the primaries.
Yeah like what pete said, WTF are you trying to do? run less injectors? use a carb? some strange mix of nonsense?
cost you about 4 dollars.
and yes you're not using an S3-S6 manifold for carb so this only applies to the primaries.
Yeah like what pete said, WTF are you trying to do? run less injectors? use a carb? some strange mix of nonsense?
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM
86rxNa
2nd Generation Specific (1986-1992)
2
08-11-15 11:51 AM