Ongoing Montana thread
12-31-14, 12:31 AM
#2252
Seriously who does that?!
Join Date: Feb 2007
Location: Bellevue
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
It's about time
That I got back onto the forum. Been far too long, been on a sort of hiatus after my seven not only shot fire but was in fact the ball itself. Irony right? Used to live in the Seattle area. Moved out to cut bank last year and haven't had a 7 in 2 years. Flames been snuffed but there is still some coals in the fire. Can't ever really get the 7 itch out I don't think. Wondering whos all in the area, haven't bs'd about 7's in way too long.
01-03-15, 09:37 AM
#2254
Ya it's been a while since anyone has gotten together about 7 related stuff. Beenot slowly keeping mine going but othere than that it's just been sitting in a garage collecting dust being it winter time. Anyone else? Ransom how goes the rx2? I see u moved it around a little.
01-03-15, 11:53 PM
#2255
Ya it's been a while since anyone has gotten together about 7 related stuff. Beenot slowly keeping mine going but othere than that it's just been sitting in a garage collecting dust being it winter time. Anyone else? Ransom how goes the rx2? I see u moved it around a little.
It is kind of like a fire I keep throwing all my money into.....and I am still buying tools...
04-22-15, 07:25 PM
#2259
Ah, well my rear iron is cracked at the dowel area by the oil filter. I have some reinforced irons Im going to use as soon as I gather some money for the o ring kit. Kinda on the back burner at the moment. Going to have a child arriving within 10 weeks now. But it still runs strong and looking pretty good I think still.
04-23-15, 01:11 AM
#2260
Ah, well my rear iron is cracked at the dowel area by the oil filter. I have some reinforced irons Im going to use as soon as I gather some money for the o ring kit. Kinda on the back burner at the moment. Going to have a child arriving within 10 weeks now. But it still runs strong and looking pretty good I think still.
Want more tools!
Last edited by chibikougan; 04-23-15 at 01:14 AM.
04-23-15, 06:42 AM
#2261
Ah, well my rear iron is cracked at the dowel area by the oil filter. I have some reinforced irons Im going to use as soon as I gather some money for the o ring kit. Kinda on the back burner at the moment. Going to have a child arriving within 10 weeks now. But it still runs strong and looking pretty good I think still.
S4 rear iron? My Mom has the FC now. I raced her the other day in my FD and she beat me while granny shifting and about 3/4 throttle
. Not sure why that motor has yet to give up yet cuz it's been through hell and back. *knock on wood*
04-23-15, 08:46 PM
#2262
Thank you guys on the congrats it's gonna be a girl. It's pretty exciting and a big change but not one bad thing about it. And of course I can always use more RX tools. I think it was a s4 rear iron. I have some spare s5 reinforced irons I'm going to use To get it going again.
04-25-15, 05:39 PM
#2263
Thank you guys on the congrats it's gonna be a girl. It's pretty exciting and a big change but not one bad thing about it. And of course I can always use more RX tools. I think it was a s4 rear iron. I have some spare s5 reinforced irons I'm going to use To get it going again.
I bought a socket for the flywheel nut if ya need it let me know.
04-26-15, 07:47 PM
#2265
https://www.atkinsrotary.com/index.php?pag=7
Don't let anyone in Missoula even try tuning it. I would say I can tune it and another individual here can tune it but neither of us have insurance to back us so I would just take it to Washington and have it done there. If you can get a base tune done and or when you do get your tune done let me know. I can forward your logs to a friend and he can go over them for the best tune for the PFC.
What is your setup going to be stock twins?
04-26-15, 07:50 PM
#2266
Matt you should pick up a FFE Trigger kit for that Haltech if you can and dump the stock CAS.
Here is the info:
Trigger Kits | Product Categories | Full Function Engineering
I would recommend the same for you idonaldson here is the info:
http://fullfunctioneng.com/?product_cat=fd-trigger-kits
Here is the info:
Trigger Kits | Product Categories | Full Function Engineering
I would recommend the same for you idonaldson here is the info:
http://fullfunctioneng.com/?product_cat=fd-trigger-kits
Last edited by chibikougan; 04-26-15 at 07:53 PM.
04-26-15, 10:14 PM
#2267
That's what I was afraid of. I know there's a dude over in Spokane that rebuilds FDs, I've seen him in a couple threads and talked with him on facebook, but I'd like someone that's got experience touching my car. I'm dropping more $$ into this car than I planned already, don't need to replace the engine a third time.
I'm going with non-sequential. Too many solenoids had busted nipples and it just looks so much cleaner with all the vacuum lines for those gone and the emissions stuff gone as well. Plan is to run non-sequential at 10-12psi for a bit and save my pennies for a gt35r and go for the single life.
As for the trigger kit, once I get all my other parts ordered, if I have money left over to get the PFC, I've looked at that, but the PFC doesn't seem to be in their ECU selections.
How much was your flywheel socket? I have a blown 13B I'm going to dismantle to part out, and need to get the flywheel off.
I'm going with non-sequential. Too many solenoids had busted nipples and it just looks so much cleaner with all the vacuum lines for those gone and the emissions stuff gone as well. Plan is to run non-sequential at 10-12psi for a bit and save my pennies for a gt35r and go for the single life.
As for the trigger kit, once I get all my other parts ordered, if I have money left over to get the PFC, I've looked at that, but the PFC doesn't seem to be in their ECU selections.
How much was your flywheel socket? I have a blown 13B I'm going to dismantle to part out, and need to get the flywheel off.
Last edited by idonaldson; 04-26-15 at 10:20 PM. Reason: Added more info
04-26-15, 10:29 PM
#2268
That's what I was afraid of. I know there's a dude over in Spokane that rebuilds FDs, I've seen him in a couple threads and talked with him on facebook, but I'd like someone that's got experience touching my car. I'm dropping more $$ into this car than I planned already, don't need to replace the engine a third time.
I'm going with non-sequential. Too many solenoids had busted nipples and it just looks so much cleaner with all the vacuum lines for those gone and the emissions stuff gone as well. Plan is to run non-sequential at 10-12psi for a bit and save my pennies for a gt35r and go for the single life.
As for the trigger kit, once I get all my other parts ordered, if I have money left over to get the PFC, I've looked at that, but the PFC doesn't seem to be in their ECU selections.
How much was your flywheel socket? I have a blown 13B I'm going to dismantle to part out, and need to get the flywheel off.
I'm going with non-sequential. Too many solenoids had busted nipples and it just looks so much cleaner with all the vacuum lines for those gone and the emissions stuff gone as well. Plan is to run non-sequential at 10-12psi for a bit and save my pennies for a gt35r and go for the single life.
As for the trigger kit, once I get all my other parts ordered, if I have money left over to get the PFC, I've looked at that, but the PFC doesn't seem to be in their ECU selections.
How much was your flywheel socket? I have a blown 13B I'm going to dismantle to part out, and need to get the flywheel off.
Flywheel socket was 110 bucks. It is impact quality with a reducer though.
04-28-15, 01:48 PM
#2271
Junior Member
Join Date: Apr 2015
Location: Montana
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, Ronan here for location but race in Helena with the SCCA a lot during the summer! Run a 83 with racing beat holley kit, pace setter exhaust free flow, ground control coil overs and camber kit, illumina struts and shocks, exedy race clutch, forza seats, and soon some large by huge r888 running on little old 225s right now! Any of you guys happen to have a set of large axle lsd side gears laying around? or want to trade a large axle lsd for a small axle lsd?
04-28-15, 05:07 PM
#2272
hey guys, Ronan here for location but race in Helena with the SCCA a lot during the summer! Run a 83 with racing beat holley kit, pace setter exhaust free flow, ground control coil overs and camber kit, illumina struts and shocks, exedy race clutch, forza seats, and soon some large by huge r888 running on little old 225s right now! Any of you guys happen to have a set of large axle lsd side gears laying around? or want to trade a large axle lsd for a small axle lsd?
Negative on that on there ghostrider. I have seen pics of your car on the website.
04-28-15, 05:16 PM
#2273
Junior Member
Join Date: Apr 2015
Location: Montana
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
We need more RX7 racers in the area, its jut me and my brothers FC right now....and that bugger we have to rip the wire harness out and fine a short in it! glad to see there are more rx owners out there! May the Wankle be with you!
05-08-15, 02:35 AM
#2274
If you guys are in need of any TII parts hop over to RCC and check out my F/S thread. Let me know what ya want.
I have a Ported Secondary Throttle Plate Removed knife edged Throttle body.
Some S5 TII fuel rails with cleaned blueprinted S5TII 550cc injectors new pintle caps o-rings etc. Data page is there too.
A mazdatrix Short shifter.
Intake manifolds
Coils and igniters
An alternator
Starter
Blah blah... Let me know
Matt I have a printed Haltech Manual for you anytime you want it.
I have a Ported Secondary Throttle Plate Removed knife edged Throttle body.
Some S5 TII fuel rails with cleaned blueprinted S5TII 550cc injectors new pintle caps o-rings etc. Data page is there too.
A mazdatrix Short shifter.
Intake manifolds
Coils and igniters
An alternator
Starter
Blah blah... Let me know
Matt I have a printed Haltech Manual for you anytime you want it.