Ongoing Montana thread
02-01-14, 06:33 PM
#2226
Junior Member
Join Date: Feb 2014
Location: Bozeman, MT
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Located in Bozeman. Just got ahold of a green FD that used to occupy Bozeman/Billings. Will be gutting it for a Hinson LS2 swap in my shop if anyone is still around on this forum.
02-12-14, 03:22 PM
#2229
Sounds like a fun project. Most of us here seem dead. I'm helping a friend/brother getting his bridgeport engine back together and in his car reciently. I have come to respect whatever swaps when it comes to rx7s anymore these days. There is a guy here in Great Falls that has an lsx fc rx7, its really clean and well done. I'm sure if you had questions I could get a hold of him and ask. I might be interested in some parts from your car, mainly the intake manifolds and intake elbow. Anyways let me know what you think on parting with those parts.
Anyone else got anything going on? Revival time for everyone maybe?
Anyone else got anything going on? Revival time for everyone maybe?
02-13-14, 11:10 AM
#2230
I have a 94 FD that I've been hoarding for the past 2 years with the full intention of swapping in my low mile shortblock I bought shortly after buying the car. Got sidelined building the garage for the project and now trying to find the motivation to get the car up and moving, or sell the whole lot and find something else to pour money into lol
02-14-14, 07:03 PM
#2231
Junior Member
Join Date: Feb 2014
Location: Bozeman, MT
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I have a 94 FD that I've been hoarding for the past 2 years with the full intention of swapping in my low mile shortblock I bought shortly after buying the car. Got sidelined building the garage for the project and now trying to find the motivation to get the car up and moving, or sell the whole lot and find something else to pour money into lol
02-19-14, 11:52 PM
#2233
Sounds like a fun project. Most of us here seem dead. I'm helping a friend/brother getting his bridgeport engine back together and in his car reciently. I have come to respect whatever swaps when it comes to rx7s anymore these days. There is a guy here in Great Falls that has an lsx fc rx7, its really clean and well done. I'm sure if you had questions I could get a hold of him and ask. I might be interested in some parts from your car, mainly the intake manifolds and intake elbow. Anyways let me know what you think on parting with those parts.
Anyone else got anything going on? Revival time for everyone maybe?
Anyone else got anything going on? Revival time for everyone maybe?
Not dead on RCC also was never going to post again as I had 666 posts. Not anymore....
02-20-14, 09:40 PM
#2234
Junior Member
Join Date: Jul 2008
Location: Fairly Reliable Falls, Montana
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Hi all
Starting to think about get the old stock & gutted RX running and back to autocross now that I have a job. The tires are corded so that is near the top of the list.
Does anyone have a set of 4x110 rims stock or otherwise for sale? Should see if it going to run first, but I will need some rims because I flat tow it to events and hate to waste the stickies.
Let me know if you have anything.
Thanks Loren
Starting to think about get the old stock & gutted RX running and back to autocross now that I have a job. The tires are corded so that is near the top of the list.
Does anyone have a set of 4x110 rims stock or otherwise for sale? Should see if it going to run first, but I will need some rims because I flat tow it to events and hate to waste the stickies.
Let me know if you have anything.
Thanks Loren
04-08-14, 10:57 PM
#2235
Hi all
Starting to think about get the old stock & gutted RX running and back to autocross now that I have a job. The tires are corded so that is near the top of the list.
Does anyone have a set of 4x110 rims stock or otherwise for sale? Should see if it going to run first, but I will need some rims because I flat tow it to events and hate to waste the stickies.
Let me know if you have anything.
Thanks Loren
Starting to think about get the old stock & gutted RX running and back to autocross now that I have a job. The tires are corded so that is near the top of the list.
Does anyone have a set of 4x110 rims stock or otherwise for sale? Should see if it going to run first, but I will need some rims because I flat tow it to events and hate to waste the stickies.
Let me know if you have anything.
Thanks Loren
Nothing here...
04-22-14, 06:19 PM
#2237
Talked to Travis the other day.
Have not heard from Ryan since the last posts.
Talked to Ant for a while a couple days ago. The flame still going and he has an FD!
04-25-14, 12:38 PM
#2238
Got my FD back together finally after the engine blew last June. Just need someone who knows something about Microtech's to help me tune or at least get a base map to get the car decently running. But then hope to sell if after its up and running well.
04-27-14, 09:09 AM
#2240
Yeah I am not a big fan of the Microtech, but since it came with the car I feel like I should just keep it in there and deal with it. Plus I think it would be a big pain to go to another aftermarket ECU and redo all the wiring from the Microtech that has been spliced into my harness.
04-29-14, 12:39 AM
#2241
Yeah I am not a big fan of the Microtech, but since it came with the car I feel like I should just keep it in there and deal with it. Plus I think it would be a big pain to go to another aftermarket ECU and redo all the wiring from the Microtech that has been spliced into my harness.
11-13-14, 07:45 AM
#2250
Junior Member
Join Date: Aug 2011
Location: East Helena, MT
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys I'm a fb and a fc owner in Helena. My 83 fb currently kinda runs she needs some MAJOR loving and a possible 13b rew transplant if I can muster up the cash and convince the mrs to let me. My 90 vert fc doesn't run bought it as a project car for me and the mrs to work on just also have to get cash lol. I believe that silver fd is here in Helena I've spotted him a few times here in town.