MoTeC Area is for discussing the MoTeC EMS.

MoTeC Motec M800 help

Thread Tools
 
Search this Thread
 
Old 08-06-15, 05:46 AM
  #1  
Full Member

Thread Starter
 
SEDUCE's Avatar
 
Join Date: Dec 2008
Location: AUSTRALIA
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
Motec M800 help

Hey there
I have a M800 and I am having some dramas with it and hoping someone can help me or even May of had similar problem.

Now car runs a 13b semi pp twin turbo on methanol with projay 90mm MtBA setup 8x 1600cc indy blue injectors and then 2x 1600 upstream injectors in intake pipe.

Now the car will run and rev fine.

Then all of a sudden U rev it and it cuts out and restarts ok and may do the same or may run fine.

Then I went to the drags and put it on the 2 step and it goes fine for about 2 seconds then just dies.
It restarts and runs and then try it again and it does the same thing


Now anyone had this drama before????

I am running a M&W Pro14 ignition box and bosh coils.

Also the wiring harness are all together wrapped in one loom.

Cheers for the help guys
Old 08-10-15, 07:22 PM
  #2  
Newbie
 
chick0's Avatar
 
Join Date: Apr 2012
Location: Australia, Melbourne
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
probably already done it but have you checked your error logging while running the car to see which errors pop up when the car suddenly dies. I had to re-wire my crank trigger wires as I had an intermittent fault
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
imitek
3rd Generation Specific (1993-2002)
9
10-18-15 03:35 PM
stickmantijuana
MoTeC
5
09-10-15 07:58 PM



Quick Reply: MoTeC Motec M800 help



All times are GMT -5. The time now is 04:16 AM.