im new on here-454 big block rx7
#1
Full Member
Thread Starter
Join Date: Mar 2010
Location: portbyron il.
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
im new on here-454 big block rx7
hi there my name is jason and i just got on here so here goes -ive had 2 rx 7s now the first one was an 87 and i put a 327 small block chevy in it with a muncie 4 speed hydro. clutch scattershield and the whole bit.---i just sold that one last week --now im starting on my next one an 88 turbo 2 rx -this ones getting a 462 big block chevy and a m-22 4 speed --wondering if anyone has done this yet ?i think my only hurdles are going to be the brake booster getting in the way and the steering shaft ---the oil pan might need to be cut in the front to gain rack clearence ---any help?---oh im a machinist and have a full machine shop at home----------Jason
#2
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,825
Received 499 Likes
on
338 Posts
Sounds like a good project.
Do they offer those big blocks in aluminum?
It's been said that an LS1 weights as much as a fully dressed turbo rotary, so those swaps don't upset the handling too much.
BTW, we've got some purists on this board. They may flame you. Please do not get involved in a flame war. Just pay them no mind and let the mods handle it from there.
Do they offer those big blocks in aluminum?
It's been said that an LS1 weights as much as a fully dressed turbo rotary, so those swaps don't upset the handling too much.
BTW, we've got some purists on this board. They may flame you. Please do not get involved in a flame war. Just pay them no mind and let the mods handle it from there.
Last edited by Pele; 03-29-10 at 09:10 AM.
#4
Full Member
Thread Starter
Join Date: Mar 2010
Location: portbyron il.
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
some progress made
well ive about got the full size big block radiator mounted (tall order) as the big block rad is mounted as far forward as i can get it .i removed the 2 inch tube in the front that mounts the horns and the res.return tube for the power steering pump it looks like i now have around 36 inches to the lip on the firewall to the dowl on the water pump.(the big block is 32 inches long rear mounting flange to water pump.had to box in the frame and remove almost an inch section on each side to make room fo the tanks of the radiator .the bottom of the rad. will be even with the front spoiler (well a lil up in the air )the mount will be even though . there is a big difference in width of the bbc compared to the small block .leaves only 4 inches a side clearence for manifolds or headers.i will get er done in time ---jason
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM