You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I picked up a PS2000 for my project Cosmo. The software looks nice. but I have question I cant seam to find out in the haltech book that came with it.
how do you see the settings in the map? LOL yes I know it says PS1000 on the ecu manger page. waiting to hear back from haltech. looks like someone put PS1000 in a PS2000 box.
anyway when I click on the ecu menu on the left nothing changes and no settings come up to change or monitor.
click on coolant temp correction it should bring up a map for the coolant temp right?
I noticed if you click P you can change the % but it does not tell what the old value was
You create custom gauge pages to display the information you want. You have a diagnostic page up so its only showing the state of the inputs/outputs. You can add whatever gauges you want. If you go to the Haltech forums site you can download some of the different gauge pages others have come up with. I setup may gauges based on what I tune fuel, ignition, idle, boost control, tps. Its all in the downloadable manual what's available and how to add the information.
Yeah you need to switch over to the "blank" tab and right click "add guage, chart, numerical display, etc". There should already be the default setup displays that come when you install the software, but I added some other stuff to help the tuning process.
Linear Mode
