Haltech Na E6k
04-25-03, 09:27 AM
#1
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Rochester NY
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Na E6k
Looking for some basic E6K mapping and setup info for a street port 13B. I'm using a slightly ported 89 intake manifold and TB (rules 
) stock n/a primary injectors and T2 secondary. High compression 89 rotors, 2" header, stock CAS and coils including the ignitors. Aux port actuators are gone and variable intake flapper is wired open or short runer mode. Any guidance you might provide would be great. I'm located in the NE about 45 miles from NYC if you're interested in getting involved with my SCCA racing program you would be more then welcome. If you are an active Haltech guru with valid referances and NA exp I would be willing to pay you for your time. (Had a bad exp with a guy who said he knew it all and sent me a map for a Wolf system!) Thanks for taking the time to check this out and I hope some one can help me out.
Thanks, John
) stock n/a primary injectors and T2 secondary. High compression 89 rotors, 2" header, stock CAS and coils including the ignitors. Aux port actuators are gone and variable intake flapper is wired open or short runer mode. Any guidance you might provide would be great. I'm located in the NE about 45 miles from NYC if you're interested in getting involved with my SCCA racing program you would be more then welcome. If you are an active Haltech guru with valid referances and NA exp I would be willing to pay you for your time. (Had a bad exp with a guy who said he knew it all and sent me a map for a Wolf system!) Thanks for taking the time to check this out and I hope some one can help me out. Thanks, John
Thread
Thread Starter
Forum
Replies
Last Post
kamikazeRyan
Haltech Forum
6
12-23-01 11:42 AM
