RX7Club.com


Go Back   RX7Club.com > Tech and Performance > Engine Management Forum > Haltech Forum
Register Forgot Password?
Register Photos FAQ Members Search Today's Posts Mark Forums Read Vendor DirectoryUsed Cars Garage
Welcome to RX7Club.com

Reply
 
 
 
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-11-07, 08:18 PM   #1
EFI Tech Wannabe
10 Year Member
 
Claudio RX-7's Avatar
 
Trader Score: (1)

Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,368
Send a message via ICQ to Claudio RX-7 Send a message via AIM to Claudio RX-7 Send a message via MSN to Claudio RX-7 Send a message via Yahoo to Claudio RX-7
Download Haltech Base Maps Here

Man, this is annoying, cant seem to get them right the first time :P. Aight, here they are again.

Please update to the latest version of ECU Manager, v1.07.4, which can be DOWNLOADED HERE as well as the latest firmware for all Haltech ECUs.

Platinum Maps:

Series 4 Plug n Play map.

Series 5 Plug n Play map.

Series 6 (for Single Turbo) coming soon!

Spring RE RX-7 Series 4/5 Base Map. To use with Series 6 or LS1 coils just change ignition output settings to Wasted Spark or Direct Fire and charge time accordingly.

Modified Platinum Maps:

Sport 1000 FD 500-1600 map. Using Stock Ignition set to Wasted Spark

Sport 1000 FC S5 800-1000 Internal MAP Sensor. Using Stock Ignition w/ Trailing Toggle.

Sport 2000 Mazda 20B w/LS1 coils, 3bar MAP and 800-1000

Older Maps:

E6X - Map for 13BT engine with 800/1600cc injectors, upgraded turbo/intercooler, internal 2.5bar/22psi map sensor, stock 2nd Gen coils/igniters/CAS.

E6X - Map for REW engine, some mods, LS1 coils, 550/1600 injectors, set to Direct Fired, external 3bar map sensor.

E6K - Map, Stock Motor, stock injectors, 3bar MAP sensor, Stock Ignition/Coils.


E6K - Map, Street Port Motor, 550/800cc injectors, 3bar MAP sensor, TO4 Turbo, FMIC, stock Ignition/Coils.


E6X - Map, Stock Motor, stock injectors, 3bar MAP sensor, Stock Ignition/Coils.

E6X - map, 550/1600cc injectors, some mods, turbo upgrade.

E6K - Series 4/5 with 550/1600cc injectors and some mods.

E6X - Series 4/5 with 550/1600cc injectors and some mods.

E8/E11 - For Stock 13BT engine, stock injectors, stock intercooler, stock turbo, w/ 3bar map sensor and haltech temp sensors. Dont forget to zero in your timing. Map is set to Direct Fire for LS1 coils, to be used in a 2nd Gen RX-7 with toggle feature switch Spark Mode to Distributor and Ign3 becomes the toggle select wire and Ign2 goes to the Trailing side. Ign4 is available as DigOut/PWM output.

E8 - 13BT S4/S5 engine, toggle feature enabled, 550/1600cc injectors. I need help with this one, can anybody try this and tell me what the result was? I also need advise on the Trailing Map, I roughly set the split to 15 degrees, and have it drop off constantly from 4500 RPMs and up.


E6X - Stock S4/S5 (with toggle feature), Stock Injectors, Stock Motor, Stock turbo, internal 2.5bar map sensor.


E6X - Map for 13B-REW with upgrades, 800/1600cc injectors.

E8 - Map for Stock FD REW motor.

E8 - Map for REW motor with 850/1600cc injectors, mild mods.

And guys, as always remember, you can mix and match what ive got on here, for exmple you can take a any map with your correct ignition settings with the wrong injector combination, and then find another map with the correct injector combination and copy the settings onto the map you will use, or using the TEXT map you can select the entire maps and copy/paste them onto yours.

Hopefully this takes care of it now.
__________________
Claudio RX-7
Anything can be tuned...
tuningtechnology@gmail.com

Last edited by Aaron Cake; 07-02-12 at 10:14 AM.
Claudio RX-7 is offline   Reply With Quote
Old 06-26-08, 02:01 PM   #2
No Life.
5 Year Member
 
wackaloo13's Avatar
 
Trader Score: (3)

Join Date: Jan 2007
Location: st. louis
Posts: 1,000
Are you sure the coolant correction map on the 13bt E8 map is correct? Everytime i attempt to start my car with it enabled i can not get it to start. when i disable it fires.
__________________
1990 Tii. BDC HBP, A-Spec 500r turbo, FJO racing methanol injection. 409.2hp/305.7ftlb. steve kan tuned
wackaloo13 is offline   Reply With Quote
Old 06-26-08, 05:36 PM   #3
EFI Tech Wannabe
10 Year Member
 
Claudio RX-7's Avatar
 
Trader Score: (1)

Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,368
Send a message via ICQ to Claudio RX-7 Send a message via AIM to Claudio RX-7 Send a message via MSN to Claudio RX-7 Send a message via Yahoo to Claudio RX-7
Please dont post here, do it in the other thread, that way this thread remains undisturbed. If the coolant map is too high lower it. Also, these maps are BASE MAPS, i have to remind everyone to please treat them as such and tune your engine according to your mod list and needs, these maps are ONLY for starting quicker than if you would have to do the whole map from scratch!

Mods, please block this thread from being posted and move these 2 posts to the other map Q&A thread.

THANKS!!
__________________
Claudio RX-7
Anything can be tuned...
tuningtechnology@gmail.com
Claudio RX-7 is offline   Reply With Quote
Old 05-18-09, 12:55 AM   #4
EFI Tech Wannabe
10 Year Member
 
Claudio RX-7's Avatar
 
Trader Score: (1)

Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,368
Send a message via ICQ to Claudio RX-7 Send a message via AIM to Claudio RX-7 Send a message via MSN to Claudio RX-7 Send a message via Yahoo to Claudio RX-7
13B Platinum Base Maps

Here are a couple of Platinum Base maps.

Plug n Play maps for the 2nd gen:

Series 4 using stock sensors, stock injectors, stock coils.

Series 5 using stock sensors, stock injectors, stock coils.

Here are to general base maps for 2nd and 3rd gen, using 800/1600 injectors, since its the most popular combination out there.

2nd Gen Map, with 3bar MAP sensor and 800/1600 injectors, stock coils and ported.

3rd Gen Map, using 800/1600 injectors, 3bar map sensor, stock coils and ported.

These maps were saved under v1.03 of ECU Manager. As always, go over all the settings to make sure they are calibrated for your sensors, never forgetting to "zero the timing", and make sure all is connected and dialed in accordingly. The 2nd Gen maps are for stock coils, and the 3rd gen maps are for wasted spark/stock setup. If you would like to run direct fire on any of these setups, just wire individual coils to each ignition output, and change the ignition mode to Direct Fire.
__________________
Claudio RX-7
Anything can be tuned...
tuningtechnology@gmail.com
Claudio RX-7 is offline   Reply With Quote
Old 06-15-09, 06:10 AM   #5
All out Freak!
10 Year Member
 
rx72c's Avatar
 
Trader Score: (7)

Join Date: Jun 2003
Location: Australia
Posts: 2,414
Can i just say. The 2nd gen map for 800/1600cc injectors was very very poor.
I loaded into a customer car that we just finished.
Tooth Offset was wrong.(at least for the factory CAS installation).

Secondaries would not come on etc.

Has the map been tested on a car?
I have fixed most of the map and car runs great now and id be happy to put up the modified version of it.
rx72c is offline   Reply With Quote
Old 06-15-09, 03:33 PM   #6
EFI Tech Wannabe
10 Year Member
 
Claudio RX-7's Avatar
 
Trader Score: (1)

Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,368
Send a message via ICQ to Claudio RX-7 Send a message via AIM to Claudio RX-7 Send a message via MSN to Claudio RX-7 Send a message via Yahoo to Claudio RX-7
Quote:
Originally Posted by rx72c View Post
Can i just say. The 2nd gen map for 800/1600cc injectors was very very poor.
I loaded into a customer car that we just finished.
Tooth Offset was wrong.(at least for the factory CAS installation).

Secondaries would not come on etc.

Has the map been tested on a car?
I have fixed most of the map and car runs great now and id be happy to put up the modified version of it.
Are you refering to the Platinum maps or the other older ones?
__________________
Claudio RX-7
Anything can be tuned...
tuningtechnology@gmail.com
Claudio RX-7 is offline   Reply With Quote
Old 06-16-09, 04:56 PM   #7
All out Freak!
10 Year Member
 
rx72c's Avatar
 
Trader Score: (7)

Join Date: Jun 2003
Location: Australia
Posts: 2,414
The platinum map.
rx72c is offline   Reply With Quote
Old 06-23-09, 12:12 AM   #8
EFI Tech Wannabe
10 Year Member
 
Claudio RX-7's Avatar
 
Trader Score: (1)

Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,368
Send a message via ICQ to Claudio RX-7 Send a message via AIM to Claudio RX-7 Send a message via MSN to Claudio RX-7 Send a message via Yahoo to Claudio RX-7
Quote:
Originally Posted by rx72c View Post
Can i just say. The 2nd gen map for 800/1600cc injectors was very very poor.
I loaded into a customer car that we just finished.
Tooth Offset was wrong.(at least for the factory CAS installation).

Secondaries would not come on etc.

Has the map been tested on a car?
I have fixed most of the map and car runs great now and id be happy to put up the modified version of it.
I have revised the map a little and did find a few things, can you try this map out and tell me what the end result is? The outputs and pretty much everything is set for 2nd Gen Stock with the PnP, including stock MAP sensor.

Series 4 Plug n Play Stock
__________________
Claudio RX-7
Anything can be tuned...
tuningtechnology@gmail.com
Claudio RX-7 is offline   Reply With Quote
Old 06-23-09, 01:18 AM   #9
Click Click Boom
 
Syritis's Avatar
 
Trader Score: (2)

Join Date: Jul 2004
Location: Calgary, Canada
Posts: 930
I must say Claudio that you are amazing for doing all this work just to benefit the community. Keep up the good work and i'll look forward to working with you later.
__________________
1988 Mazda RX7 GX - 13B-REW TO4S
Quote:
Originally Posted by Aaron Cake View Post
For some reason society has evolved to protect the stupid and encourage them to reproduce more stupid. 100 years ago these people could not have existed in such great numbers. 200 years ago they would have not existed at all.
Syritis is offline   Reply With Quote
Old 06-24-09, 06:07 PM   #10
Click Click Boom
 
Syritis's Avatar
 
Trader Score: (2)

Join Date: Jul 2004
Location: Calgary, Canada
Posts: 930
E6X - Map for 13B-REW with upgrades, 800/1600cc injectors.
this is a .map file not a .6XM file? can't be loaded with a E6X
__________________
1988 Mazda RX7 GX - 13B-REW TO4S
Quote:
Originally Posted by Aaron Cake View Post
For some reason society has evolved to protect the stupid and encourage them to reproduce more stupid. 100 years ago these people could not have existed in such great numbers. 200 years ago they would have not existed at all.
Syritis is offline   Reply With Quote
Old 08-21-09, 02:33 PM   #11
Exhaust Leak
 
coolblue's Avatar
 
Trader Score: (0)

Join Date: Mar 2004
Location: Asia pacific
Posts: 29
Hi claudio

Can you help me on the 1600cc X 4 for e6k maps
bridge ported on 13b-RE

I cant get the idle right after i change turbo and upgrade the 550cc stock RE injectors to top feed indy blue bosch 1600cc

thanks
coolblue is offline   Reply With Quote
Old 10-04-09, 03:01 AM   #12
Listen to King Diamond.
5 Year Member
 
need RX7's Avatar
 
Trader Score: (1)

Join Date: Dec 2006
Location: Sterling Heights MI
Posts: 2,725
Send a message via AIM to need RX7
I downloaded Halwin and have just been playing around with it for the last couple days, I downloaded a couple these maps to look at and I have a question;

I noticed that inj time steadily increases until it reaches positive load, at which point it drops, and begins rising again. Why is this? I'm trying to learn more about all this stuff.
__________________
-Ted
'86 RX7 base - Gone green.
'86 RX7 sport - Rust. Now with blown engine.
S4 Pride.
need RX7 is offline   Reply With Quote
Old 01-06-10, 11:34 AM   #13
R.E Amemiya 雨*宮*
5 Year Member
 
got_boost's Avatar
 
Trader Score: (16)

Join Date: Oct 2004
Location: Montreal, Canada
Posts: 1,199
rx7outlaw Wangan_RX7
*EDIT* posted in other thread !!
my bad
__________________
my aggressive ported Devil 7 (pics)http://gotboost.monchar.com/
(videos)http://www.youtube.com/user/rx7outlaw


Quote:
Originally Posted by GoodfellaFD3S
No kidding. RX-7s are known for much more than "staight-line performance"......did you mistakenly think that you're on a mustang forum?
got_boost is offline   Reply With Quote
Old 02-21-10, 03:26 PM   #14
Spinner
5 Year Member
 
cmsgama's Avatar
 
Trader Score: (0)

Join Date: Mar 2009
Location: Portugal
Posts: 107
Quote:
Originally Posted by rx72c View Post
Can i just say. The 2nd gen map for 800/1600cc injectors was very very poor.
I loaded into a customer car that we just finished.
Tooth Offset was wrong.(at least for the factory CAS installation).

Secondaries would not come on etc.

Has the map been tested on a car?
I have fixed most of the map and car runs great now and id be happy to put up the modified version of it.
Hi

Can you sent me by PM your modified version of platinum map for 2nd gen 800/1600?

Regards
__________________
Mazda RX7 FB 1982 ready to burn rubber
Mazda RX7 FC Turbo II 1991 waiting "time" ($) for the project
Mazda RX7 FC NA 1988 disassemble waiting time for the assembling
cmsgama is offline   Reply With Quote
Old 04-15-10, 01:33 AM   #15
long live the monster BP
 
NZ_87_TURBO's Avatar
 
Trader Score: (0)

Join Date: Nov 2005
Location: New Zealand
Posts: 483
is it just me of do none of the maps on either thread work???
__________________
1987 TII, S4 stage 2 , FD3S UIM, S5 60-1 Hybrid turbo. 3" exhaust. HKS EVC IV, Haltech E6X, MSD 6a, Malpassi FPR, FMIC, Walbro 255 pump,18" Advanti Fluid whites. 680cc pri x 1680cc sec.
NZ_87_TURBO is offline   Reply With Quote
Old 05-08-10, 07:35 PM   #16
Going faster every time
10 Year Member
 
eddierotary's Avatar
 
Trader Score: (7)

Join Date: Nov 2001
Location: Watertown, NY
Posts: 2,141
the link dont work
__________________
00 Honda Civic SI, stock
88 Mazda Rx7 Turbo II: Street Ported, Greddy IC and turbo kit, TDO6/60-1 mod by BNR supercars, 4x1000cc injector dynamic, microtech lt8s, Racing Beat Exhaust, ACT extreme, full weight, plus more. 12.4@110mph on 7/31/11, going faster this year
eddierotary is offline   Reply With Quote
Old 05-09-10, 11:51 AM   #17
BDC
BDC Motorsports
10 Year Member
 
BDC's Avatar
 
Trader Score: (0)

Join Date: Jun 2002
Location: Grand Prairie, TX
Posts: 3,664
Ya wanna link my zips over too?
BDC is offline   Reply With Quote
Old 05-10-10, 12:00 AM   #18
EFI Tech Wannabe
10 Year Member
 
Claudio RX-7's Avatar
 
Trader Score: (1)

Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,368
Send a message via ICQ to Claudio RX-7 Send a message via AIM to Claudio RX-7 Send a message via MSN to Claudio RX-7 Send a message via Yahoo to Claudio RX-7
Quote:
Originally Posted by BDC View Post
Ya wanna link my zips over too?
Sure thing B., send me an email with all the files, and let me know exactly what's what so i can post them too. I would keep it simple and just do common variations of each engine, stock ports, street ports, bridge and peripheral, stock injectors, 500/1600, 800/1600, stock ignition, msd and ls1 coils, and of course, separate 2nd gen from 3rd gen.

I'll host them on my server.
__________________
Claudio RX-7
Anything can be tuned...
tuningtechnology@gmail.com
Claudio RX-7 is offline   Reply With Quote
Old 05-30-10, 10:00 PM   #19
Exhaust Leak
 
Trader Score: (1)

Join Date: Dec 2008
Location: B,Ham Al
Posts: 41
some llinks do not work
__________________


RX7 TII 1988
RX8 GT 2004
Dzire is offline   Reply With Quote
Old 06-02-10, 10:04 AM   #20
EFI Tech Wannabe
10 Year Member
 
Claudio RX-7's Avatar
 
Trader Score: (1)

Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,368
Send a message via ICQ to Claudio RX-7 Send a message via AIM to Claudio RX-7 Send a message via MSN to Claudio RX-7 Send a message via Yahoo to Claudio RX-7
Man, this is annoying, cant seem to get them right the first time :P. Aight, here they are again.

Please update to the latest version of ECU Manager, v1.07.4, which can be DOWNLOADED HERE as well as the latest firmware for all Haltech ECUs.

Platinum Maps:

Series 4 Plug n Play map.

Series 5 Plug n Play map.

Series 6 (for Single Turbo) coming soon!

Spring RE RX-7 Series 4/5 Base Map. To use with Series 6 or LS1 coils just change ignition output settings to Wasted Spark or Direct Fire and charge time accordingly.

Modified Platinum Maps:

Sport 1000 FD 500-1600 map. Using Stock Ignition set to Wasted Spark

Sport 1000 FC S5 800-1000 Internal MAP Sensor. Using Stock Ignition w/ Trailing Toggle.

Sport 2000 Mazda 20B w/LS1 coils, 3bar MAP and 800-1000

Older Maps:

E6X - Map for 13BT engine with 800/1600cc injectors, upgraded turbo/intercooler, internal 2.5bar/22psi map sensor, stock 2nd Gen coils/igniters/CAS.

E6X - Map for REW engine, some mods, LS1 coils, 550/1600 injectors, set to Direct Fired, external 3bar map sensor.

E6K - Map, Stock Motor, stock injectors, 3bar MAP sensor, Stock Ignition/Coils.


E6K - Map, Street Port Motor, 550/800cc injectors, 3bar MAP sensor, TO4 Turbo, FMIC, stock Ignition/Coils.


E6X - Map, Stock Motor, stock injectors, 3bar MAP sensor, Stock Ignition/Coils.

E6X - map, 550/1600cc injectors, some mods, turbo upgrade.

E6K - Series 4/5 with 550/1600cc injectors and some mods.

E6X - Series 4/5 with 550/1600cc injectors and some mods.

E8/E11 - For Stock 13BT engine, stock injectors, stock intercooler, stock turbo, w/ 3bar map sensor and haltech temp sensors. Dont forget to zero in your timing. Map is set to Direct Fire for LS1 coils, to be used in a 2nd Gen RX-7 with toggle feature switch Spark Mode to Distributor and Ign3 becomes the toggle select wire and Ign2 goes to the Trailing side. Ign4 is available as DigOut/PWM output.

E8 - 13BT S4/S5 engine, toggle feature enabled, 550/1600cc injectors. I need help with this one, can anybody try this and tell me what the result was? I also need advise on the Trailing Map, I roughly set the split to 15 degrees, and have it drop off constantly from 4500 RPMs and up.


E6X - Stock S4/S5 (with toggle feature), Stock Injectors, Stock Motor, Stock turbo, internal 2.5bar map sensor.


E6X - Map for 13B-REW with upgrades, 800/1600cc injectors.

E8 - Map for Stock FD REW motor.

E8 - Map for REW motor with 850/1600cc injectors, mild mods.

And guys, as always remember, you can mix and match what ive got on here, for exmple you can take a any map with your correct ignition settings with the wrong injector combination, and then find another map with the correct injector combination and copy the settings onto the map you will use, or using the TEXT map you can select the entire maps and copy/paste them onto yours.

Hopefully this takes care of it now.
__________________
Claudio RX-7
Anything can be tuned...
tuningtechnology@gmail.com
Claudio RX-7 is offline   Reply With Quote
Old 07-09-10, 11:08 AM   #21
Insane Burnout
10 Year Member
 
Javier's Avatar
 
Trader Score: (0)

Join Date: Mar 2004
Location: Ga.
Posts: 513
This is what i get when i try to download a map. Sorry Claudio



Object not found!
The requested URL was not found on this server. The link on the referring page seems to be wrong or outdated. Please inform the author of that page about the error.

If you think this is a server error, please contact the webmaster.

Error 404
www.tuningtechnology.net
Fri Jul 9 17:10:36 2010
Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.7e mod_auth_pgsql/2.0.3
Javier is offline   Reply With Quote
Old 07-25-10, 11:26 PM   #22
Maniac 7
5 Year Member
 
Cleva Locc Dogg's Avatar
 
Trader Score: (2)

Join Date: Sep 2005
Location: HAYWARD
Posts: 189
Clever Perez
all of these do not work
__________________

60-1, 750sX4(for now), modded tb, no emmisions, rteck2.1, b4radintercooler lol, 3"straight into 2.5"Y pipe, walbro etc etc.. LS-EATER!
Cleva Locc Dogg is offline   Reply With Quote
Old 04-21-11, 03:59 PM   #23
Clutch Kicker
5 Year Member
 
driftfcbuckey's Avatar
 
Trader Score: (2)

Join Date: Jan 2008
Location: 89121 las vegas nevada
Posts: 2,467
Send a message via Yahoo to driftfcbuckey
if anyone has a basemap for a haltech E6k for a stock S4 13bt with stock ports, stock turbo, 550/880 injectors, 3 bar map, stock TPS, and stock coils please EMAIL me ASAP please! i had a tuner lined up for an event this weekend, and he bailed last minute. 24hrs from now i need this car running, and on a trailer ready to go. please help ASAP.
702 624 4917 i'm in vegas
driftfcbuckey@gmail.com
driftfcbuckey is offline   Reply With Quote
Old 04-21-11, 04:13 PM   #24
EFI Tech Wannabe
10 Year Member
 
Claudio RX-7's Avatar
 
Trader Score: (1)

Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,368
Send a message via ICQ to Claudio RX-7 Send a message via AIM to Claudio RX-7 Send a message via MSN to Claudio RX-7 Send a message via Yahoo to Claudio RX-7
Quote:
Originally Posted by Cleva Locc Dogg View Post
all of these do not work
I just tried them, they still work, right click "save as" and plain clicking the links opens up the download dialog box to save the zip file.
__________________
Claudio RX-7
Anything can be tuned...
tuningtechnology@gmail.com
Claudio RX-7 is offline   Reply With Quote
Old 04-21-11, 05:56 PM   #25
Spinner
5 Year Member
 
Trader Score: (0)

Join Date: Jan 2008
Location: idaho
Posts: 206
still no worky for me? wanted base map s4 N/A bridge? stock ignition 550cc's
RX200013B is offline   Reply With Quote
Old 04-21-11, 05:56 PM
RX7Club
Mazda RX7




Paid Advertisement


 
 
 
Reply

Tags
13b, base, direct, download, e11, e6x, e8, fire, halltech, haltech, map, maps, rotary, rx7, sensor

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Post Haltech Base Map REQUESTS Here Claudio RX-7 Haltech Forum 436 06-26-14 08:08 AM
For those needing Haltech base maps.. BDC Haltech Forum 17 07-02-09 09:35 PM
Q: why an ingnition timing at idle is 5 BTDC at base haltech maps? funklove Haltech Forum 1 11-17-06 11:34 PM
base maps? PowerOverFC Microtech 6 09-08-03 12:19 PM
The difference tuning base maps and injection maps?? rotorhead333 Power FC Forum 3 05-10-02 11:24 PM


All times are GMT -5. The time now is 08:45 PM.
All content Copyright 2007 by Internet Brands, Inc.

Contacts