stickmantijuana

iTrader: (1)

I ust got this Holley solenoid water/ meth injection nozzle combo. How do I program the elite to increase solenoid open time with regard to increasing air temp, boost, and rpm? All output function I'm looking at seem to be on/off types when certain conditions are met.. thank you.

stickmantijuana

iTrader: (1)

anyone?

C. Ludwig

iTrader: (27)

Use a generic output. Set it up as a duty cycle output. You'll then have a 3D map opened up where you can choose what axis to use.

stickmantijuana

iTrader: (1)

Thanks as always. I didn't see the 3d map last time but will look closer.

Havoc

yeah I havnt seen the 3rd axis either?

C. Ludwig

iTrader: (27)

You're looking at it.

Zepticon

iTrader: (1)

You have the X-axis (Fuel Load), Y-axis (RPM) and then what ever you put in each square (like the one you have selected in blue) will be the Z-axis. Then you have a 3 dimensional map (i think).



Like on this image, the value you input is what generate the hight from the X(RPM) / Y(Throttle) plane, in to 3D.

C. Ludwig

iTrader: (27)

^ Correct.

The map values are the Z axis.

Havoc

Durrrrr sorry about that