Haltech Anyone getting rid of a stock harness?
#1
Lawn Ornament
Thread Starter
Anyone getting rid of a stock harness?
I have a little project i want to do
As long as the connectors inside of the Firewall are good, and engine connectors are good I will buy it from you
As long as the connectors inside of the Firewall are good, and engine connectors are good I will buy it from you
#2
development
I've got a chopped up harness but will send it to you for the ECU plugs, and the plugs I didn't use for the Haltech...probably just the secondary injectors, fuel temp, air temp, water temp, solenoids, EGR, AP, etc are left.
I used, TPS, primaries, CAS, Idle speed, and sold knock...I believe I still have it, and will let it go cheap.
I used, TPS, primaries, CAS, Idle speed, and sold knock...I believe I still have it, and will let it go cheap.
#4
Tenseiga
iTrader: (1)
Join Date: Apr 2003
Location: Iowa
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
I have all except one. I used a jspec wiring harness for my FD. The blue plug for the ecu doesn't fit i believe..........they have an extra pin.
it was cheap and low milage so i didnt' complain
it was cheap and low milage so i didnt' complain