Haltech AEM wide band with E6k
01-03-07, 10:51 PM
#3
Yes it works.
Only problem with the E6K is that there is no way to calibrate the input to suit the wideband's actual output so the ratio/voltage on the E6K might not be exactly right on.
Connect the 5v(white wire) output from the AEM to the Spare A/D input on the E6K. Go to the input pages and set up the Spare A/D for Uego input. Try and connect the power and ground from the AEM to the same source as the E6K also.
Only problem with the E6K is that there is no way to calibrate the input to suit the wideband's actual output so the ratio/voltage on the E6K might not be exactly right on.
Connect the 5v(white wire) output from the AEM to the Spare A/D input on the E6K. Go to the input pages and set up the Spare A/D for Uego input. Try and connect the power and ground from the AEM to the same source as the E6K also.
