GB#3 - FC3S Bi-Xenon HID Projector Headlights (v.2) - SBG
07-15-15, 02:49 PM
#1
GB#3 - FC3S Bi-Xenon HID Projector Headlights (v.2) - SBG
Back by popular demand!
With summer in full swing, we seem to be receiving a ton of messages asking if our headlights are available. Unfortunately as we only make them in large batches for group buy runs we’ve had to turn everyone away for single orders due to lack of time to build them as we’re working on so many other projects at the moment. Since the headlights have to be hand built and are very time consuming we’ve put them on the back burner for quite some time.
INFO:
We all know that the stock headlights on the RX-7 are completely inadequate for night driving. The possibility of missing something on the side of the road, up ahead, or around a corner creates a dangerous scenario. We finally decided to fix this problem once and for all. SakeBomb Garage is pleased to knock your socks off with the highest quality 'pop-up' Bi-Xenon Projector HID kit for the FC.
Unlike our original design this new design does not require housing spacers to clear the bulb connector. At nearly half the cost, and with no hassles with modifications or spacers to fit the deep projector the new setup is a no brainer for anyone looking for a proper lighting setup for their FC (or any other car using the same headlight size).
FC Owners: Welcome to the 21st Century!
PRODUCT HIGHLIGHTS:
- New headlight housings, with bi-xenon (high/low) projectors
- Optically clear projector lenses
- New SBG 4300K bulbs (5000k SBG bulbs with 50w ballast option, 6000k available as special order)
- High quality 35w SLIM weather/shock proof digital ballast (35w heavy duty ballasts, & 50w heavy duty ballasts available)
- Custom SBG Plug and Play wiring harness - specifically for the FC
Optional 35W HeavyDuty Ballast Upgrade:
Our standard Bi-Xenon kit comes with 35W Slim Ballast to create the most cost effective and lightweight Bi-Xenon kit available. We offer an optional upgrade to a 35W HeavyDuty Ballast, which are more durable and resistant to temperature and vibration. They also have an integrated ignitor for a cleaner and more compact wiring solution.
Optional 50W HeavyDuty Ballast Upgrade:
We also offer the option of 50W ballasts (and accompanying 5000k bulbs) instead of the OEM-spec 35W ballasts and 4300K bulbs. There are pros and cons to using 50W ballasts, so please select the kit that best suits your personal preference.
Xenon bulbs are manufactured to run at 35W, however they can be over-driven to produce more light than would normally be available at a lower wattage. Typically one will find an additional 30% increase in total light, however this extra light does come at a cost: the additional wattage can somewhat reduce the lifespan of the bulbs. The color range of the bulbs is shifted LOWER (more yellow) with increased wattage; however the color temp can be shifted back up to normal bright white by using 5000K bulbs, which is why we will supply the 50W ballasts with 5000K bulbs. At the end of the day, yes, the total light output is increased with 50W ballasts, but it does not change the beam pattern with which it is distributed so you simply end up with a BRIGHTER light, not wider or longer throw. Is this a good thing? Sometimes yes, sometimes no. In the city where streets are well lit, the extra light from the 50w ballasts is definitely welcome, but on very dimly lit back-roads the contrast difference between foreground and background could feel overwhelming to some, and reflector signs will appear very reflective. It is a personal choice whether this increased light output is right for you, but if in doubt remember that the OEM standard is 35W.
We’re confident that this is currently the best performing lighting kit available for the FC, from here to Japan… bar none! This setup is the standard against which other lights are currently judged. Yes, they're that good. These lights ARE the gold standard, and we've yet to see a higher performing lighting setup. We built these lights not only for aesthetic benefit, but as a much needed safety item to prevent a potential accident. Yes they are expensive, but so is your car and they have personally saved us from accidents, deer, and tickets over the many years we’ve been running them
PRICE ($100 off retail):
$465.00 - 35w Ballasts and SBG 4300k Bulbs
$485.00 - 35w Heavy Duty Ballasts and SBG 4300k Bulbs
$505.00 - 50w Heavy Duty Ballasts (~30% brighter) with SBG 5000K Bulbs
This group buy base pricing is $100 off the standard price; However, we typically do not have these in stock as it is.
********************************
GROUP BUY INSTRUCTIONS:
This Group Buy will run a little differently than usual. Here's how it will work:
1. We have set up a group buy "deposit" page, which requires you make an initial deposit of $100 towards your headlights. The link to that page is here:
GROUP BUY DEPOSIT: FC3S SilverLine Bi-Xenon HID Projector Headlights (July 2015) - SakeBomb Garage LLC
2. After completing payment for this deposit, you will receive a confirmation e-mail of your order.
3. We will then send you a second e-mail containing a unique coupon code for a $200.00 credit towards your purchase of your
FC3S: SilverLine Bi-Xenon HID Projector Headlights - SakeBomb Garage LLC
4. YOUR UNIQUE COUPON CODE WILL EXPIRE AT 12:00 MIDNIGHT AUGUST 31ST, 2015 PST.
5. YOU MUST SUBMIT FULL PAYMENT FOR YOUR "FC3S RX-7 SILVER LINE HEADLIGHTS" BY 12:00 MIDNIGHT AUGUST 31ST, 2015 PST.
6. To submit your full payment before 8/31/2015 visit the following link to and check-out using your unique group-buy deposit code:
FC3S: SilverLine Bi-Xenon HID Projector Headlights - SakeBomb Garage LLC
7. After 8/31/2015 your group buy code will expire, and you will lose your spot if you have not sent in full payment. If any spots remain you may still complete your checkout at that point, and we will apply your $100 deposit towards the purchase of the lights.
********************************
NOTE: We are making 15 sets of lights total for this run. We do not know when/if we will have time to make these available again, so for now this will be the last run of headlights until further notice.
Add yourself to the list and post it below!
Example: ForumUsername - LHD - 35wSlim
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
With summer in full swing, we seem to be receiving a ton of messages asking if our headlights are available. Unfortunately as we only make them in large batches for group buy runs we’ve had to turn everyone away for single orders due to lack of time to build them as we’re working on so many other projects at the moment. Since the headlights have to be hand built and are very time consuming we’ve put them on the back burner for quite some time.
INFO:
We all know that the stock headlights on the RX-7 are completely inadequate for night driving. The possibility of missing something on the side of the road, up ahead, or around a corner creates a dangerous scenario. We finally decided to fix this problem once and for all. SakeBomb Garage is pleased to knock your socks off with the highest quality 'pop-up' Bi-Xenon Projector HID kit for the FC.
Unlike our original design this new design does not require housing spacers to clear the bulb connector. At nearly half the cost, and with no hassles with modifications or spacers to fit the deep projector the new setup is a no brainer for anyone looking for a proper lighting setup for their FC (or any other car using the same headlight size).
FC Owners: Welcome to the 21st Century!
PRODUCT HIGHLIGHTS:
- New headlight housings, with bi-xenon (high/low) projectors
- Optically clear projector lenses
- New SBG 4300K bulbs (5000k SBG bulbs with 50w ballast option, 6000k available as special order)
- High quality 35w SLIM weather/shock proof digital ballast (35w heavy duty ballasts, & 50w heavy duty ballasts available)
- Custom SBG Plug and Play wiring harness - specifically for the FC
Optional 35W HeavyDuty Ballast Upgrade:
Our standard Bi-Xenon kit comes with 35W Slim Ballast to create the most cost effective and lightweight Bi-Xenon kit available. We offer an optional upgrade to a 35W HeavyDuty Ballast, which are more durable and resistant to temperature and vibration. They also have an integrated ignitor for a cleaner and more compact wiring solution.
Optional 50W HeavyDuty Ballast Upgrade:
We also offer the option of 50W ballasts (and accompanying 5000k bulbs) instead of the OEM-spec 35W ballasts and 4300K bulbs. There are pros and cons to using 50W ballasts, so please select the kit that best suits your personal preference.
Xenon bulbs are manufactured to run at 35W, however they can be over-driven to produce more light than would normally be available at a lower wattage. Typically one will find an additional 30% increase in total light, however this extra light does come at a cost: the additional wattage can somewhat reduce the lifespan of the bulbs. The color range of the bulbs is shifted LOWER (more yellow) with increased wattage; however the color temp can be shifted back up to normal bright white by using 5000K bulbs, which is why we will supply the 50W ballasts with 5000K bulbs. At the end of the day, yes, the total light output is increased with 50W ballasts, but it does not change the beam pattern with which it is distributed so you simply end up with a BRIGHTER light, not wider or longer throw. Is this a good thing? Sometimes yes, sometimes no. In the city where streets are well lit, the extra light from the 50w ballasts is definitely welcome, but on very dimly lit back-roads the contrast difference between foreground and background could feel overwhelming to some, and reflector signs will appear very reflective. It is a personal choice whether this increased light output is right for you, but if in doubt remember that the OEM standard is 35W.
We’re confident that this is currently the best performing lighting kit available for the FC, from here to Japan… bar none! This setup is the standard against which other lights are currently judged. Yes, they're that good. These lights ARE the gold standard, and we've yet to see a higher performing lighting setup. We built these lights not only for aesthetic benefit, but as a much needed safety item to prevent a potential accident. Yes they are expensive, but so is your car and they have personally saved us from accidents, deer, and tickets over the many years we’ve been running them
PRICE ($100 off retail):
$465.00 - 35w Ballasts and SBG 4300k Bulbs
$485.00 - 35w Heavy Duty Ballasts and SBG 4300k Bulbs
$505.00 - 50w Heavy Duty Ballasts (~30% brighter) with SBG 5000K Bulbs
This group buy base pricing is $100 off the standard price; However, we typically do not have these in stock as it is.
********************************
GROUP BUY INSTRUCTIONS:
This Group Buy will run a little differently than usual. Here's how it will work:
1. We have set up a group buy "deposit" page, which requires you make an initial deposit of $100 towards your headlights. The link to that page is here:
GROUP BUY DEPOSIT: FC3S SilverLine Bi-Xenon HID Projector Headlights (July 2015) - SakeBomb Garage LLC
2. After completing payment for this deposit, you will receive a confirmation e-mail of your order.
3. We will then send you a second e-mail containing a unique coupon code for a $200.00 credit towards your purchase of your
FC3S: SilverLine Bi-Xenon HID Projector Headlights - SakeBomb Garage LLC
4. YOUR UNIQUE COUPON CODE WILL EXPIRE AT 12:00 MIDNIGHT AUGUST 31ST, 2015 PST.
5. YOU MUST SUBMIT FULL PAYMENT FOR YOUR "FC3S RX-7 SILVER LINE HEADLIGHTS" BY 12:00 MIDNIGHT AUGUST 31ST, 2015 PST.
6. To submit your full payment before 8/31/2015 visit the following link to and check-out using your unique group-buy deposit code:
FC3S: SilverLine Bi-Xenon HID Projector Headlights - SakeBomb Garage LLC
7. After 8/31/2015 your group buy code will expire, and you will lose your spot if you have not sent in full payment. If any spots remain you may still complete your checkout at that point, and we will apply your $100 deposit towards the purchase of the lights.
********************************
NOTE: We are making 15 sets of lights total for this run. We do not know when/if we will have time to make these available again, so for now this will be the last run of headlights until further notice.
Add yourself to the list and post it below!
Example: ForumUsername - LHD - 35wSlim
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
07-15-15, 02:50 PM
#2
Info on our Bi-Xenon setup
HID Lighting 101:
Other HID “kits” use the stock headlight housing in conjunction with a Xenon bulb. The plus side, they are unbelievably cheap. The negative side? Typically these setups:
- Blind other drivers
- Have a horrible field of view
- Severely scatter the light
- Have uneven lighting with no cutoff
- Actually WORSEN your night vision (they throw intense light into the foreground. This makes your pupils close, causing your distance night-vision to become worse than with your stock halogen lights)
Projector HID's on the other hand are what is used in every OEM HID lighting setup. Our Projectors:
- Have a very even dispersion of light
- Have a very wide dispersion of light
- Have a very long throw (with high beams)
- Illuminate much larger portions of the road while not ruining your night vision
- Oh yeah, and they don't blind other drivers, or attract attention from people who may or may not drive Crown Victorias
Projectors vs Reflectors:
Here is a good video comparing true projector HID’s to “conversion/reflector” HID’s:
To truly see the difference you need to see our kit in person, pictures honestly don’t do it justice. But don’t take our word for it…
Here’s what current owners have said:
Optional 50W Ballasts:
We are now offering the option of a 50w ballast (and accompanying 5000k bulb) instead of the OEM-spec 35w ballasts. There are pros and cons to using 50w ballasts, but we'll do our best to explain the differences below.
Xenon bulbs are manufactured to run at 35 watts, however they can be over-driven to produce more light than would normally be available at a lower wattage. Typically one will find an additional 30% increase in total light, however this extra light does come at a cost. The additional wattage does reduce the lifespan of the bulbs somewhat. The color range of the bulbs is shifted LOWER (more yellow) with increased wattage (however the color temp can be shifted back up to normal (around 4300k) by using "5000K bulbs"), which is why we will supply this kit with 5000 Kelvin bulbs.
At the end of the day, yes, the total light output is increased, but it does not change the beam pattern with which it is distributed, so you simply end up with a BRIGHTER light, not wider or longer throw. Is this a good thing? Sometimes yes, sometimes no. In the city where streets are well lit, the extra light from the 50w ballasts is definitely welcome, but on very dimly lit back-roads the contrast difference between foreground and background could feel overwhelming to some, and reflector signs will appear very reflective. It is a personal choice whether this increased light output is right for you, but if in doubt remember that the OEM standard is 35w.
HID Lighting 101:
Other HID “kits” use the stock headlight housing in conjunction with a Xenon bulb. The plus side, they are unbelievably cheap. The negative side? Typically these setups:
- Blind other drivers
- Have a horrible field of view
- Severely scatter the light
- Have uneven lighting with no cutoff
- Actually WORSEN your night vision (they throw intense light into the foreground. This makes your pupils close, causing your distance night-vision to become worse than with your stock halogen lights)
Projector HID's on the other hand are what is used in every OEM HID lighting setup. Our Projectors:
- Have a very even dispersion of light
- Have a very wide dispersion of light
- Have a very long throw (with high beams)
- Illuminate much larger portions of the road while not ruining your night vision
- Oh yeah, and they don't blind other drivers, or attract attention from people who may or may not drive Crown Victorias
Projectors vs Reflectors:
Here is a good video comparing true projector HID’s to “conversion/reflector” HID’s:
To truly see the difference you need to see our kit in person, pictures honestly don’t do it justice. But don’t take our word for it…
Here’s what current owners have said:
Optional 50W Ballasts:
We are now offering the option of a 50w ballast (and accompanying 5000k bulb) instead of the OEM-spec 35w ballasts. There are pros and cons to using 50w ballasts, but we'll do our best to explain the differences below.
Xenon bulbs are manufactured to run at 35 watts, however they can be over-driven to produce more light than would normally be available at a lower wattage. Typically one will find an additional 30% increase in total light, however this extra light does come at a cost. The additional wattage does reduce the lifespan of the bulbs somewhat. The color range of the bulbs is shifted LOWER (more yellow) with increased wattage (however the color temp can be shifted back up to normal (around 4300k) by using "5000K bulbs"), which is why we will supply this kit with 5000 Kelvin bulbs.
At the end of the day, yes, the total light output is increased, but it does not change the beam pattern with which it is distributed, so you simply end up with a BRIGHTER light, not wider or longer throw. Is this a good thing? Sometimes yes, sometimes no. In the city where streets are well lit, the extra light from the 50w ballasts is definitely welcome, but on very dimly lit back-roads the contrast difference between foreground and background could feel overwhelming to some, and reflector signs will appear very reflective. It is a personal choice whether this increased light output is right for you, but if in doubt remember that the OEM standard is 35w.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
07-16-15, 06:22 PM
#3
1. Website order (Texas) - deposit paid
2.
3.
4.
5.
6.
7.
8.
9.
10.
2.
3.
4.
5.
6.
7.
8.
9.
10.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
07-22-15, 04:37 PM
#4
1. Website order (Texas) - deposit paid
2. Website order (California) - deposit paid
3.
4.
5.
6.
7.
8.
9.
10.
2. Website order (California) - deposit paid
3.
4.
5.
6.
7.
8.
9.
10.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
07-30-15, 03:53 PM
#5
1. Website order (Texas) - deposit paid
2. Website order (California) - deposit paid
3. Website order (Hawaii) - deposit paid
4. Website order (APO) - fully paid
5.
6.
7.
8.
9.
10.
2. Website order (California) - deposit paid
3. Website order (Hawaii) - deposit paid
4. Website order (APO) - fully paid
5.
6.
7.
8.
9.
10.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
Trending Topics
08-17-15, 05:56 PM
#9
Try again - we've been working out some bugs that popped up after a recent update to the website back end. If things still don't work out, shoot us an email at info@sakebombgarage.com and we'll get you taken care of.
We have some partway through the assembly process - the hard part is already done
The group buy still isn't full, but we're hoping to begin production and have them ready to ship by the end of September, however turnout has been lower than we expected so far. Hopefully it'll pick up.
We have some partway through the assembly process - the hard part is already done
The group buy still isn't full, but we're hoping to begin production and have them ready to ship by the end of September, however turnout has been lower than we expected so far. Hopefully it'll pick up.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
08-18-15, 01:01 PM
#13
The V.2 refers to the second revision of our headlights; we used different projectors in the first version that required spacers and a lot of modifications to get them to fit properly. So, we redid them to have a new projector that fits way better.
Provided everything goes according to plan, yes
Provided everything goes according to plan, yes
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
08-19-15, 06:17 PM
#15
Our 35W slim ballasts are designed to fit in smaller spaces to give you more flexibility with where you place them, but the HD (heavy duty) ballasts won't wear out as quickly since they've got better heat sinks and more durable (and larger) electronics built in. Both are fully potted and fully waterproof, the slim ballast has an external igniter where the HD and 50W ballast have the igniter built in to the box itself.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
08-23-15, 09:16 AM
#16
I'm very interested in this for my FC, but have a few questions I didn't see answered here before I pull the trigger on joining the GB.
1. Do you have detailed installation instructions posted up somewhere that I can download & review first before signing up?
2. Do you have a solid delivery date scheduled, based on the current group buy cut-off for orders? Previous posts allude to "late Sep/early Oct", but I'd feel more comfortable with an actual "no later than" delivery date.
3. Assuming you do commit to a "no later than" delivery date, if SBGarage fails to meet that date, will folks who participated in the GB have the option to either wait for delivery or chose to opt out and receive a full & prompt refund of their payments?
Thanks!
1. Do you have detailed installation instructions posted up somewhere that I can download & review first before signing up?
2. Do you have a solid delivery date scheduled, based on the current group buy cut-off for orders? Previous posts allude to "late Sep/early Oct", but I'd feel more comfortable with an actual "no later than" delivery date.
3. Assuming you do commit to a "no later than" delivery date, if SBGarage fails to meet that date, will folks who participated in the GB have the option to either wait for delivery or chose to opt out and receive a full & prompt refund of their payments?
Thanks!
08-31-15, 01:21 PM
#20
Sorry for the delay getting back to everyone! We were shortstaffed last week, there's a superbug going around that took out the whole team for a few days 
Stay healthy folks!
We've got a full instruction guide available, please shoot us an email at info@sakebombgarage.com and I'll send you the PDF.
We don't have a solid delivery date, mainly because we're building multiple chassis' HID kits all at the same time and each kit has its own complications. Ideally we'll have these out within the next few weeks but as with our previous group buys it's always a bit of a guessing game.
If at any point you wish to back out of the group buy, please email us and we'll help get things taken care of.
We actually changed the design of the ballasts recently to include extra wire for this exact reason 
Yes, we have replacement ballasts and bulbs in stock and ready to go at all times. Ballasts and bulbs are warranteed for a period of 1 year, and after that we offer replacement parts for very reasonable prices.
It's always good to hear about happy customers We put a lot of time and effort into making the best possible products we can.
I've also got an updated list of orders:
1. Website order (Texas) - fully paid
2. Website order (California) - fully paid
3. Website order (Hawaii) - fully paid
4. Website order (APO) - fully paid
5. Website order (New Jersey) - deposit paid
6. Website order (Indiana) - fully paid
7. Website order (New Jersey) - fully paid
8.
9.
10.
Stay healthy folks!I'm very interested in this for my FC, but have a few questions I didn't see answered here before I pull the trigger on joining the GB.
1. Do you have detailed installation instructions posted up somewhere that I can download & review first before signing up?
2. Do you have a solid delivery date scheduled, based on the current group buy cut-off for orders? Previous posts allude to "late Sep/early Oct", but I'd feel more comfortable with an actual "no later than" delivery date.
3. Assuming you do commit to a "no later than" delivery date, if SBGarage fails to meet that date, will folks who participated in the GB have the option to either wait for delivery or chose to opt out and receive a full & prompt refund of their payments?
Thanks!
1. Do you have detailed installation instructions posted up somewhere that I can download & review first before signing up?
2. Do you have a solid delivery date scheduled, based on the current group buy cut-off for orders? Previous posts allude to "late Sep/early Oct", but I'd feel more comfortable with an actual "no later than" delivery date.
3. Assuming you do commit to a "no later than" delivery date, if SBGarage fails to meet that date, will folks who participated in the GB have the option to either wait for delivery or chose to opt out and receive a full & prompt refund of their payments?
Thanks!
We don't have a solid delivery date, mainly because we're building multiple chassis' HID kits all at the same time and each kit has its own complications. Ideally we'll have these out within the next few weeks but as with our previous group buys it's always a bit of a guessing game.
If at any point you wish to back out of the group buy, please email us and we'll help get things taken care of.
Yes, we have replacement ballasts and bulbs in stock and ready to go at all times. Ballasts and bulbs are warranteed for a period of 1 year, and after that we offer replacement parts for very reasonable prices.
We put a lot of time and effort into making the best possible products we can.I've also got an updated list of orders:
1. Website order (Texas) - fully paid
2. Website order (California) - fully paid
3. Website order (Hawaii) - fully paid
4. Website order (APO) - fully paid
5. Website order (New Jersey) - deposit paid
6. Website order (Indiana) - fully paid
7. Website order (New Jersey) - fully paid
8.
9.
10.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
Last edited by SakeBomb Garage; 08-31-15 at 01:23 PM.
09-02-15, 04:03 PM
#21
If you haven't redeemed your coupon code yet, make sure to do that soon! Some of them have expired already, so make sure to let us know if you have issues applying the coupon code at checkout.
1. Website order (Texas) - fully paid
2. Website order (California) - fully paid
3. Website order (Hawaii) - fully paid
4. Website order (APO) - fully paid
5. Website order (New Jersey) - deposit paid
6. Website order (Indiana) - fully paid
7. Website order (New Jersey) - fully paid
8. Website order (Washington) - deposit paid
9.
10.
1. Website order (Texas) - fully paid
2. Website order (California) - fully paid
3. Website order (Hawaii) - fully paid
4. Website order (APO) - fully paid
5. Website order (New Jersey) - deposit paid
6. Website order (Indiana) - fully paid
7. Website order (New Jersey) - fully paid
8. Website order (Washington) - deposit paid
9.
10.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
09-03-15, 01:21 PM
#23
1. Website order (Texas) - fully paid
2. Website order (California) - fully paid
3. Website order (Hawaii) - fully paid
4. Website order (APO) - fully paid
5. Website order (New Jersey) - deposit paid
6. Website order (Indiana) - fully paid
7. Website order (New Jersey) - fully paid
8. Website order (Washington) - fully paid
9.
10.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
09-08-15, 03:16 PM
#24
Looks like we got an order in here twice.
1. Website order (Texas) - fully paid
2. Website order (California) - fully paid
3. Website order (Hawaii) - fully paid
4. Website order (APO) - fully paid
5. Website order (New Jersey) - fully paid
6. Website order (Indiana) - fully paid
7. Website order (Washington) - fully paid
8.
9.
10.
1. Website order (Texas) - fully paid
2. Website order (California) - fully paid
3. Website order (Hawaii) - fully paid
4. Website order (APO) - fully paid
5. Website order (New Jersey) - fully paid
6. Website order (Indiana) - fully paid
7. Website order (Washington) - fully paid
8.
9.
10.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com