GB#2 - FC3S Bi-Xenon HID Projector Headlights (v.2)… FINAL GB! - SBG
#26
We have a couple sets not spoken for. Shoot us an email info@sakebombgarage.com
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
#28
We're still working to wrap up the FC kits... the FD group buy took longer than we were anticipating. Did you email us at info@sakebombgarage.com ? I didn't see an email from you recently. Anyway, we'll get you sorted out but no we have not begun shipping FC lights, only FD's are out for delivery but we're working to finish up the FC build ASAP.
-Heath
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
#30
Thank you all for your continued patience! We're going to be shipping the first of the orders today. We've had a few production delays that set us back farther than we liked, but it's finally time!
The only thing left to sort out is that we're short a few sets of 4300K bulbs. We're offering a free upgrade to 50W ballasts and 5000K bulbs for those of you that ordered 4300k, but it'll be on a first come first serve basis. The other option is to keep your 4300K bulbs but you may need to wait an additional week for the new bulbs to arrive from our supplier.
Please let us know as we'd like to get these kits on their way to you ASAP; they're already boxed up and ready to go, with the exception of the bulbs!
The only thing left to sort out is that we're short a few sets of 4300K bulbs. We're offering a free upgrade to 50W ballasts and 5000K bulbs for those of you that ordered 4300k, but it'll be on a first come first serve basis. The other option is to keep your 4300K bulbs but you may need to wait an additional week for the new bulbs to arrive from our supplier.
Please let us know as we'd like to get these kits on their way to you ASAP; they're already boxed up and ready to go, with the exception of the bulbs!
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
#32
Here's a last teaser shot to tide everyone over until they can see their new headlights in person. Looking forward to your install photos!
Thanks everyone one last time for being so patient. We know it was a lengthy process but we hope that you feel that it's worth it. Thanks again for all your support!
Thanks everyone one last time for being so patient. We know it was a lengthy process but we hope that you feel that it's worth it. Thanks again for all your support!
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
#33
Rotary Enthusiast
iTrader: (1)
Join Date: Nov 2012
Location: bloomington, mn
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
I will do a before and after video on a back road I bomb on a regular to show the difference. Use the same road each time for consistency. Alas... that's after the snow melts away
#39
Original Gangster/Rotary!
iTrader: (213)
I've been rocking these on my FDs since they were first produced, and have installed countless of them at my shop over the years. Absolutely the best mod you can do for your RX-7 guys, you won't be disappointed!
#40
Rotary Reborn!
iTrader: (3)
So like a typical male I installed it without reading the instructions completely. It is a plug in easy job. Everything marked and just awesome. Drops in.
In the instructions it suggested using a small amount of clear silicone sealant to seal the headlights. It does come with some sealant already installed but for extended wet weather driving it suggests to use this. THinking I should do this as twice driving to deals gap it was a torrential down pour. When I was tightening the headlight trim piece on one of lights, it appeared to separate the front cover from the housing so now I am wondering if I should pull them out and seal them?
What you think?
In the instructions it suggested using a small amount of clear silicone sealant to seal the headlights. It does come with some sealant already installed but for extended wet weather driving it suggests to use this. THinking I should do this as twice driving to deals gap it was a torrential down pour. When I was tightening the headlight trim piece on one of lights, it appeared to separate the front cover from the housing so now I am wondering if I should pull them out and seal them?
What you think?
#41
So like a typical male I installed it without reading the instructions completely. It is a plug in easy job. Everything marked and just awesome. Drops in.
In the instructions it suggested using a small amount of clear silicone sealant to seal the headlights. It does come with some sealant already installed but for extended wet weather driving it suggests to use this. Thinking I should do this as twice driving to deals gap it was a torrential down pour. When I was tightening the headlight trim piece on one of lights, it appeared to separate the front cover from the housing so now I am wondering if I should pull them out and seal them?
What you think?
In the instructions it suggested using a small amount of clear silicone sealant to seal the headlights. It does come with some sealant already installed but for extended wet weather driving it suggests to use this. Thinking I should do this as twice driving to deals gap it was a torrential down pour. When I was tightening the headlight trim piece on one of lights, it appeared to separate the front cover from the housing so now I am wondering if I should pull them out and seal them?
What you think?
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
#43
Unfortunately no, we sold out of our remaining kits about a month ago. We might be able to do another production run, but we'd have to get enough people interested and committed to make it feasible.
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM