FDNewbie

That's right guys...due to popular demand, FDNewbie Imports is bringing to ya a complete 99Spec parts GB! ***Being that the GB is centered around the purchase of the front bumper, as long as you purchase the front bumper, you'll be paying a flat shipping rate of $120 on shipping, regardless of what else you purchase with it. Ie, pay shipping ONCE, regardless of how many front end parts you buy )*** - Front bumper = $400 - Rebar = $400 - Chin Spoiler = $169 - OEM Combos + KS Harness = $335 - Replica combo lights = $205 - OEM Fog Lights = $300 - Fender Sidemarkers = $60 - Undertray = $120 - Oil cooler/brake ducts = $120 - 99spec wing = $835 (prepainted in the OEM color of your choice) - 99spec Talights: $425 Please note that all parts are OEM originals unless otherwise specified. More specialized and harder to find 99spec part such as sideskirts, 17" rims, armrests, steering wheels, and interior clusters are also available, but on an individual order basis. Special pricing IS available for those participating in this GB who also wish to purchase any one of these rarer parts. Thanks! ~Ramy FDNewbie Imports Payment instructions here: http://www.rx7club.com/showpost.php?...3&postcount=66

7_rocket

-OEM Combos + KS Harness = $335
- Replica combo lights = $205

Are you talking about the turn signals?

G's 3rd Gen

i need undertray and brake/cooler ducts. Pm me w/ details. G

RotorMotor

ramy, is this the absolute BEST that you can do on pricing?
just wondering cause i was comparing prices @ XXXX and XXXX for their bumper kits (front bumper, rebar, directional lights, and lip) for $1325, and $1327 respectively. Yours came to $1304 which is better, but ultimately only a 20 dollar difference over the other shops. is there anyway to get the price any lower? thanks, heath

FDNewbie

Please consult http://fdnewbieimports.com/products.php for product name, pictures, and descriptions (that way there's no miscommunication).

If you'd like to place an order, please use our Orders page on the website (www.FDNewbieImports.com), and we'll take care of it. I do not conduct business via PMs.

Actually Heath, here's my math...

XXXX front end #1: (Bumper, Replica Turn Lamps, Chin spoiler, and Rebar) = $1325
XXXX front end #2: (Bumper, Replica Turn Lamps, Chin spoiler, and Rebar) = $1327
FDNewbie Imports front end: (Bumper, Replica Turn Lamps, Chin spoiler, and Rebar) = $1174

I pretty much quadruple checked the math, so I'm not sure how you're getting your #s... I think what you're doing is comparing my front end price using genuine OEM combo lights to their front end prices, which use non-oem replica combo lights

Also, please note that this is PRIVATELY OWNED webspace. Ie I pay for this section of the forum. So mention of other vendors is NOT allowed - especially competing ones But nonetheless, I think I'm still beating everyone's price

Thanks,
~Ramy

sleeper7

i am interested in getting the front bumper , chin spoiler, oem combos+ks harness, tail lights
but i am wondering what the hell the rebar, undertray is.. can u email me a pic of those to cgale_19@hotmail.com?

btw.. i agree with ramy.. dont insult him.. if you had questions like that send it in a pm or email.. this his his paid webspace.

Herblenny

How quickly can you get the oil cooler ducts?

FDNewbie

The reinforcement bar is the fiberglass bar that sits behind the bumper. It's made to take those 15 mph impacts without transferring the impact force to the front frame bar of the car.

As for the undertray, it's the black plastic piece that covers the bottom of the engine, while providing air passages for air to escape the radiator and exit underneath the engine bay.

Unfortuantely, I do not currently have pictures of the undertray, but here is a pic of the 99spec rebar (in white):



Quickly, but Phil, please note this GB is centered around the 99spec front bumper. All orders not including the front bumper can be handled on an individual bases via placing an order through the website.

Thanks,
~Ramy

sleeper7

thanks Ramy.
how long is the GB going to be open? (when do i have to place my order and send my cash in by)

FDNewbie

NP

As for time frame, typically I leave GBs open for 2 weeks or so, enough to generate a good amount of interest.

tahmid

Ramy,

Is it possible for you to ship to Dhaka, Bangladesh? If so, what are your modes of payment? We don't have paypal in Bangladesh. Can only do account transfer. Will e-mail you @ fdnewbieimports.

Am interested (BUT all depends on how we can workout currency transfer and shipping mode).

1. front bumper
2. chin
3. rear tail lights

Shipping costs? $120 flat will bumper, can you workout how much for Dhaka, Bangladesh? Will it be more expensive or cheaper?

Thanks
Tahmid

FDNewbie

Tahmid, definitely email me to work out the details, but in short, yes I can definitely ship to you. I've shipped parts all over Europe, Asia, and even Australia/New Zealand...so it shouldn't be a problem I'm certain it will cost more, however.

~Ramy

RotorMotor

hey ramy, honestly i had NO IDEA that the prices from the other stores were for REPLICA signals. that makes a BIG difference!!

As far as my vendor faux pa, i apologize. i know you to have some of the best pricing around and that youre always upfront and honest... so i didnt feel out of line asking about comparisons to other vendors. and as always you cleared things up and brought some of the other vendors practices to light. i would have assumed that everyone used mazda parts, and it seems that youre the only vendor to be upfront and inform us that we have a choice. and yes, comparing prices with OEM parts you blow everyone out of the water!!!! so in conclusion, im most definately in on this GB (especially now that i KNOW what im getting for my $$).

so i have 2 last questions... do i need to order any mounting hardware for the front end, or is everything there to attach all the bits together?
and secondly, can you do GB pricing on some rear mud flaps in IBM, cause ill be needing some of those as well

thanks as always, ramy.... just keepin you on your toes -heath

tahmid

Thanks and e-mailed you.

FDNewbie

Well other shops (most at least) are very clear about it. For example, at least one of the ones you mentioned doesn't even carry the OEM 99spec combos. Look and see if they list them (as an item you can purchase seperately). It's b/c they're expensive, and require the harnesses, and too many ppl just opt to go w/ the replicas for cost reasons. But you know me: OEM or bust. I'm offering the replicas, however, simply b/c some ppl may want to opt to go that route (although most of my customers are hardcore OEM-heads lol)

This assumes you reuse your 93 - 95 OEM front end's mounting hardware. All you get is the bumper skin. Mounting hardware is an accessory, and it's quite expensive...

Here's the GB for that: FD rear mudflaps/rockguards

My pleasure

NP I'll get to it soon...bear w/ me please

~Ramy

Noxlupus

How much for the Fender Sidemarkers in clear? I'm assuming that the ones you have quoted are for the amber.

FDNewbie

Prob like $105. And they're REAL nice too

Noxlupus

Great, then hook me up with one.

FDNewbie

If it's part of the GB, just make sure you specify it. If not, email plz

coneklr

Can we see a pic of the oil cooler/brake ducts? I couldn't find it on your site.

sherman2k

Hi Ramy, how much for armrests?

toyzzzz

quick question before I order, will the oil cooler brake ducts work with aftermarket mocal dual oil coolers or will I to fabricate some?

RotorMotor

yeah same question here, cause im going to be using some aftermarket coolers (but i dont know which ones yet).... me not knowing probably doesnt help you advise me however

FDZero

K, I emailed you FDNewbie just now about the '99 chin lip. I will pay for that whenever I hear back from you. I hope to get by mid of next week (before March 7th....). And you take PayPal only...no Amex, mastercard, etc?

tC

caredden

^^^

I am pretty sure Ramy's paypal account will accept any form of payment. You can select a credit card as YOUR primary mode of payment on your paypal account...