DIY parts sources
#1
On flats
Thread Starter
iTrader: (29)
Join Date: Oct 2004
Location: Albuquerque
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
DIY parts sources
Brought over from the single turbo section. . .
Tons of stuff:
http://www.rossmachineracing.com/index.htm
Mostly only good for fuel rails/extra injector holders
http://www.atpturbo.com/
http://www.sdsefi.com/
Good source for cheap stainless velocity stacks:
http://www.bluegrassmuffler.com/
Burns:
http://www.burnsstainless.com/
Tons of stuff:
http://www.rossmachineracing.com/index.htm
Mostly only good for fuel rails/extra injector holders
http://www.atpturbo.com/
http://www.sdsefi.com/
Good source for cheap stainless velocity stacks:
http://www.bluegrassmuffler.com/
Burns:
http://www.burnsstainless.com/
#3
Lift Off in T-Minus...
iTrader: (6)
Bell Intercoolers - Good place for custom Bar & Plate IC cores:
http://www.bellintercoolers.com/pages/AACore.html
Advance Thermal Products: http://atpwrap.com/html/turbo.html
Aero Tubing (the cool steel suspension tubing you see on top level formula cars): http://www.spa-uk.co.uk/aerofoils/aero_size.htm
RC Engineering - Universal Fuel Rail Material: http://www.rceng.com/Fuel-Rail-Mater...nch-P50C9.aspx
Marren Pro Fuel Dampener and Fuel Rails: http://www.injector.com/fueldampers....f234864e76b8c2
http://www.injector.com/fuelrails.php
Online Metals: http://www.onlinemetals.com/
Aluminum Oval Tubing: http://www.tacomarine.com/item--Oval...-A42-0054.html
Pegasus Auto Racing Supplies: http://www.pegasusautoracing.com/
SMC One Touch Fittings: http://www.smcetech.com/CC_host/page...4c9ff974376195
Pit Stop USA (good site resource): http://www.pitstopusa.com/Categories.aspx?ID=3370
Titanium: http://m-vincent.com/titanium.html?g...FRXMiQoduHUMOA
Titanium 2: http://www.ticotitanium.com/plate.php#sheet
http://www.bellintercoolers.com/pages/AACore.html
Advance Thermal Products: http://atpwrap.com/html/turbo.html
Aero Tubing (the cool steel suspension tubing you see on top level formula cars): http://www.spa-uk.co.uk/aerofoils/aero_size.htm
RC Engineering - Universal Fuel Rail Material: http://www.rceng.com/Fuel-Rail-Mater...nch-P50C9.aspx
Marren Pro Fuel Dampener and Fuel Rails: http://www.injector.com/fueldampers....f234864e76b8c2
http://www.injector.com/fuelrails.php
Online Metals: http://www.onlinemetals.com/
Aluminum Oval Tubing: http://www.tacomarine.com/item--Oval...-A42-0054.html
Pegasus Auto Racing Supplies: http://www.pegasusautoracing.com/
SMC One Touch Fittings: http://www.smcetech.com/CC_host/page...4c9ff974376195
Pit Stop USA (good site resource): http://www.pitstopusa.com/Categories.aspx?ID=3370
Titanium: http://m-vincent.com/titanium.html?g...FRXMiQoduHUMOA
Titanium 2: http://www.ticotitanium.com/plate.php#sheet
#6
Rotary Freak
Join Date: Dec 2001
Location: chandler, AZ
Posts: 2,402
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
On flats
Thread Starter
iTrader: (29)
Join Date: Oct 2004
Location: Albuquerque
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
To make it a little more consolidated and easier for Sean to clean up . . .
From:
http://store.racing-solutions.org/
http://www.mcmaster.com/
http://www.airflo.com/
http://www.woolfaircraft.com/
http://www.coneeng.com/index.html
Sean,
If you're supplying DIYers, you should have whoever handles your website make you a little section showing what you have available. Be sure to add your site to the list here if you do.
From:
also check out: https://www.rx7club.com/showthread.php?t=777717
http://www.mcmaster.com/
http://www.airflo.com/
http://www.woolfaircraft.com/
http://www.coneeng.com/index.html
Sean,
If you're supplying DIYers, you should have whoever handles your website make you a little section showing what you have available. Be sure to add your site to the list here if you do.
#11
3rd rotors a charm
iTrader: (4)
Last time I was there you had no more remember . Then schools starts again and I fall off the face of the earth. I can be in on Friday if your going to have them in stock. Sometime after your lunch . Ideally if you had some 316L that would be great. But 316 will do. 1.875 please
Last edited by charlies7; 08-27-08 at 12:20 PM.
#13
Full Member
iTrader: (1)
Join Date: Nov 2006
Location: Marietta, GA
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Doesn't have bent tubing but has a lot of steel, AL, SS, and more in many forms:
http://www.metalsdepot.com/
http://www.metalsdepot.com/
#14
On flats
Thread Starter
iTrader: (29)
Join Date: Oct 2004
Location: Albuquerque
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
http://www.pitstopusa.com/Categories.aspx?ID=3363
edit:
oops. . . afgmoto already had the site linked, just to the fuel stuffs. . .this link is to the fabrication section. Mods, feel free to remove if you see it as redundant.
edit:
oops. . . afgmoto already had the site linked, just to the fuel stuffs. . .this link is to the fabrication section. Mods, feel free to remove if you see it as redundant.
Last edited by calculon; 09-17-08 at 10:44 AM.
#16
Senior Member
Join Date: May 2004
Location: Niskayuna, NY / Lemoyne, PA
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
#17
Lift Off in T-Minus...
iTrader: (6)
^Nice
http://www.fibreglast.com/ - Expensive
http://www.uscomposites.com/carbonpage.html - Middle of the road pricing
http://www.aircraftspruce.com/menus/cm/index.html - Cheapest source outside of bulk buying
http://www.fibreglast.com/ - Expensive
http://www.uscomposites.com/carbonpage.html - Middle of the road pricing
http://www.aircraftspruce.com/menus/cm/index.html - Cheapest source outside of bulk buying
#21
Mandrel Bends (6061 and 304) 90 deg and less:
www.globaltecheng.com
Mandrel Bends (6061, 321, 304, and lots of others) 180 degrees, custom bends, etc:
http://www.woolfaircraft.com/
Inexpensive supply of straight circular, rectangular, and square tubing, angle, Tee, half round, round, square, and rectangle stock, plate and sheet. All in various grades of stainless, aluminum, steel, copper, plastics (including delrin and hdpe)...
www.asapsource.com
www.globaltecheng.com
Mandrel Bends (6061, 321, 304, and lots of others) 180 degrees, custom bends, etc:
http://www.woolfaircraft.com/
Inexpensive supply of straight circular, rectangular, and square tubing, angle, Tee, half round, round, square, and rectangle stock, plate and sheet. All in various grades of stainless, aluminum, steel, copper, plastics (including delrin and hdpe)...
www.asapsource.com
#23
Junior Member
Join Date: Jun 2010
Location: Springfield, TN
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
These are specifically for small random nuts/bolts, hoses, fittings, solenoids, or whatever random things you may need. Their catalogs are huge, but its worth having one on hand
http://grainger.com
http://mscdirect.com large selection, and typically has next day shipping standard for most areas
http://mcmaster.com cheaper than msc, but lacks some of the diversity
I've gotten a lot of my random barbs and fittings from here. Usually this is for bulk orders, though
http://eldonjames.com/html/AutomotivePage1.htm
http://grainger.com
http://mscdirect.com large selection, and typically has next day shipping standard for most areas
http://mcmaster.com cheaper than msc, but lacks some of the diversity
I've gotten a lot of my random barbs and fittings from here. Usually this is for bulk orders, though
http://eldonjames.com/html/AutomotivePage1.htm