Engine Management Forum Use this area for discussing Haltech, Wolf 3D, Power FC, AEM and any other aftermarket ECU upgrades. Help/Questions/Tuning

Microtech/Apexi Question

Thread Tools
 
Search this Thread
 
Old 04-11-13, 01:53 PM
  #1  
Junior Member
Thread Starter
iTrader: (2)
 
nickbroker's Avatar
 
Join Date: Mar 2013
Location: Wisconsin
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Microtech/Apexi Question

Okay guys I bought a 93 FD and have some questions that you more than likely will easily answer.

The car now has a microtech LT10-s in it. Also had a Haltech E6K laying in back of car that used to be the computer before old owner switched. And an Apexi AVCR hooked in glovebox and hooked up to turbos but all the wires like purple,red,grey and such are not hooked up to anything so dont turn on.

Question is now that the car has the Microtech LT10S hooked up do you believe I need/ should keep and hook back up that Apexi AVCR to the microtech, Or is that not neccasary when running the Microtech? And how can I find out if the Haltech actually works or not I only have the ECU itself.

If I dont need obviously I will try to sell both units. The Apexi also has the little timer unit and multiple different wiring pigtails in box yet.


Thanks alot guys!
Old 04-11-13, 09:18 PM
  #2  
Junior Member
Thread Starter
iTrader: (2)
 
nickbroker's Avatar
 
Join Date: Mar 2013
Location: Wisconsin
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by gmonsen
It sounds like you have 3 generations of engine management, but you should take your time on deciding what's what. Both the older e6k and the Microtech LT10s are full engine management systems that can control your boost, so the Apexi AVCR is unnecessary, assuming one or both of the EMS units work. The Microtech is the newer unit and is pretty robust. That's the one I would use, assuming, again, that its in good working order.

Gordon
Awsome and thanks for the reply Gordon! The Microtech is whats hooked up in the car now and seems to work well. I was just really confused when I saw the Apexi AVCR and it wasnt hooked up. Well hooked up completely. Would be nice if I had all the wiring for the E6K so it was worth something or so I could test to make sure it works!
Old 04-12-13, 04:09 AM
  #3  
Lives on the Forum

iTrader: (6)
 
David Hayes's Avatar
 
Join Date: Jun 2002
Location: FL
Posts: 6,505
Received 177 Likes on 120 Posts
Isn't the Apexi AVC-R a boost controller versus EMS like the Haltech and Microech? I'm pretty sure the Microtech has some boost control capabilities but the Apexi has a lot of fancy stuff on it so you may wish to use both.
Old 04-12-13, 08:58 AM
  #4  
Rotary Specialists
RX7Club Vendor
iTrader: (11)
 
Banzai-Racing's Avatar
 
Join Date: Jan 2008
Location: Indiana
Posts: 4,824
Received 307 Likes on 179 Posts
The Apexi ACV-R is a boost controller, it is not the S-AFC which is an air/fuel controller.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
05-25-21 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM



Quick Reply: Microtech/Apexi Question



All times are GMT -5. The time now is 02:16 AM.