You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
That was a norcal kids wing... made out of cut up aluminum I think... That car was sold to Ryan Tuerck, up here in NH, and then to another kid that lives next to me... the wing was sold to someone else.
And by that custom spoiler "not being very nice" Hariguchi's big gigantic yellow spoiler also "was not very nice". If you like it, make one. 2 jank ebay gt wings cut in half, flipped and bolted together with your own wing tips. 12x12x1/8" carbon fiber sheets are like $45.
Here's how I set mine up... I made templates, and had them dimensionally transferred to CAD, and water jet cut... then used two alum. turnbuckles L/R adjustable so I can make changes to the angle of attack. The turnbuckle mounts, and chassis mounts I drilled, and tapped so everything bolts directly into the main alum. section...
Pretty straight forward, and allows for adjustability.
I'd have to measure it, to be honest... the side plates stick out a little past the 30mm wide rear over fenders... I can try and get a measurement... It's off the 05 Falken FD that a buddy of mine drove around for a little while.(and poured our hearts into)
What I meant was, it was not good. Meaning that it was a piece of ****, thrown together, with no attention to detail.
Woah, wait. Is that some non-perfect sideskirt fitment on your car? Are you flooring the gas in above picture making the front end lift?
See what i'm getting at here?
Your car is nice but at the same time you contradicted yourself. Thrown together. No attention to detail. But you must be at work all the time and are too busy to fix that.....Oh and had those tires laying around and lost your coilover wrenches and dont have any paint to match/blend after you fix the skirt.
Look, this thread has no point. You're basing the entire premise of the thread off of the idea that Haruguchi's wing can be duplicated. This is a misconception, as nothing Haruguchi does can be duplicated by anyone, ever.
That one Norcal guy tried it, and Dave says it turned out like dog ****. See what I mean?
I'm not trying to duplicate anything, I just like the style and would like to incorporate a little bit of it into my own. Doesn't eveybody see something they like and try to make something like it? Not exactly like it because people like being unique, as do I.
I'm not trying to duplicate anything, I just like the style and would like to incorporate a little bit of it into my own. Doesn't eveybody see something they like and try to make something like it? Not exactly like it because people like being unique, as do I.
Dont bother explaining yourself.
DO IT and **** what people think/say. It's your car. If people want to talk **** on whatever it is you want to do, do it anyway and dont leave it open for discussion on rx7club.
On the internet/rx7 club, everyone is a pro d1 level 10 initial d gang captain and has like 13204809238498 experience points and seat time and anything you do to your car is wrong. You can either laugh like i do or listen and regret not doing what you wanted aka/think for yourself.
Linear Mode
