Build Threads The place for complete build threads of 1st Gen RX-7s.

'79 sa22...nyc

Thread Tools
 
Search this Thread
 
Old 10-18-14, 09:00 AM
  #51  
Rotary Freak

Thread Starter
iTrader: (15)
 
cfamilyfix's Avatar
 
Join Date: Aug 2010
Location: Brooklyn NY
Posts: 1,735
Received 2 Likes on 2 Posts
Decided to tackle my electrical nightmare. Pulled my interior to bits to investigate my nonworking cluster. Finally got the cluster out and discover this.



Bingo! I think. Its always nice to SEE the problem. Cleaned the area and bridged it with some wire and solder



Replaced all the blown light bulbs and plug it back in, tach comes to life but is still not right. Bright side (no pun intended) is the dimmer works great now. So looks like I will be looking for a replacement cluster. I will still take this one apart further to see if it is fixable.
Old 10-19-14, 08:45 PM
  #52  
Rotary Freak

Thread Starter
iTrader: (15)
 
cfamilyfix's Avatar
 
Join Date: Aug 2010
Location: Brooklyn NY
Posts: 1,735
Received 2 Likes on 2 Posts
I managed to track down another cluster for a reasonable price (this is much harder than it sounds) and got to work on why the blower was non op. Removed the glovebox and took it all apart. Couldn't believe all the junk in there



connected it to a battery and discovered it was a good motor. After lots of "radio voo doo" removal and replacing the proper ground and 20 amp fuse we now have an operational blower. I will drive out to pick up my cluster this week some time After that just waiting on a new flasher and then the interior all goes back together. I might as well get some speakers at this point and install the stock radio. Should be fun.
Old 10-19-14, 09:22 PM
  #53  
Rotary Freak

Thread Starter
iTrader: (15)
 
cfamilyfix's Avatar
 
Join Date: Aug 2010
Location: Brooklyn NY
Posts: 1,735
Received 2 Likes on 2 Posts
here is the latest walk around on the car before I pulled apart the interior to troubleshoot electrical stuff


Really considering taking this off the market. I think its a great car and I'm really attatched to it since its "my motor" in there and all the time put in.
Old 10-21-14, 08:46 AM
  #54  
Never Follow

iTrader: (18)
 
82transam's Avatar
 
Join Date: Feb 2002
Location: North Jersey
Posts: 8,305
Likes: 0
Received 67 Likes on 49 Posts
Don't sell it!
Old 12-21-14, 09:46 AM
  #55  
Rotary Freak

Thread Starter
iTrader: (15)
 
cfamilyfix's Avatar
 
Join Date: Aug 2010
Location: Brooklyn NY
Posts: 1,735
Received 2 Likes on 2 Posts
I thought I would take a minute to update this thread....and bring it to its conclusion. After sorting all the bugs on the car (or most of them) I kept the car on the market and it sold around Thanksgiving time. It went to forum member JoonPR. I couldn't be happier. Great guy. I know the car is in good hands and will be looked after.
The decision to sell it stemmed from the fact that I did everything I wanted to the car, from some pretty involved body work to using it as a home for an engine I built kinda like a test bed car. It taught me a lot. This was also the first car I used an aftermarket carb on with a dead head set up. It was interesting and made great noise. All these lessons will be very handy when I start the build on my 85 which is a keeper. Stay tuned!
Old 12-21-14, 11:45 AM
  #56  
Lapping = Fapping

iTrader: (13)
 
Jeff20B's Avatar
 
Join Date: Aug 2001
Location: Near Seattle
Posts: 15,725
Received 70 Likes on 64 Posts
Cool story, bro. Could you add a link to the build thread for your '85? That'd be great for completeness sake.
Old 01-14-17, 06:59 PM
  #57  
Rotary Freak

Thread Starter
iTrader: (15)
 
cfamilyfix's Avatar
 
Join Date: Aug 2010
Location: Brooklyn NY
Posts: 1,735
Received 2 Likes on 2 Posts
A few years late with this, but for completeness sake lol
https://www.rx7club.com/build-thread...built-1092028/




All times are GMT -5. The time now is 11:48 AM.