Fc3spowa

iTrader: (9)

Figured I would make a build thread now that things are starting to pick up.

I got this '93 Touring a few weeks ago. The day she got home



Also came with a few extra parts..



Two complete REW's, trans, boxes and boxes of parts

Tan leather + grease = lots of hours with some lexol, it's cleaning up well though



Efeni wheel and pettit boost gauge/pod


VIS scoot style cf hood, still need to get headlights the car had frog eyes on it. Covered in water that's why it looks weird, the hood is getting recleared soon though


B&M shifter with RE ****


Got some BC coils


Also got this

Fc3spowa

iTrader: (9)

This came in today


-Atkins A rebuild kit
-New oil control ring springs
-OEM cryogenically treated side seals
-OEM corner seal w/plugs
-ALS apex seals

The housings look amazing, almost zero wear on the irons and they're already ported, and the rotors/bearings look superb. I'm still waiting on a parts washer and engine stand adapter to come in before I can clean everything real good and assemble the motor. I'm also waiting on a set of stock twins/manifold/y pipe which I'll be using for the next couple months while I finish the single setup.

Plans now:

-Finish motor
-Sell ms02's to fund some VS-XX's
-Finish cleaning up interior
-Get car running and broken in
-Finish doing a full detail on the paint

I'll have more pics up in the next couple days as I finish organizing all the parts and finish building a new workbench. I will be documenting the rebuild, as well as my journey to the 500 club

And how she's sitting currently, no motor, trans or diff in yet

Fc3spowa

iTrader: (9)

I also have an exedy clutch in the mail and some other small things

I still need to order intercooler pipping for the front mount, a bov, misc. hoses and stuff, plugs etc. I'm hoping to have it running in the next couple weeks though

Dliverance

iTrader: (9)

Those wheels are so hideous but I love them so much

Where in FL are you?

Fc3spowa

iTrader: (9)

You should totally buy them from me

I'm about 45 minutes north of Tampa

Niners RX7

crazy looking hood

Dliverance

iTrader: (9)

Where in springhill?

Fc3spowa

iTrader: (9)

Lol, I didn't really like it at first but it's growing on me. I'm going v mount so it will at least serve a purpose

Close, I'm a town over; Brooksville. I'm in SH all the time though

I know I'm slacking on the pics, been cleaning all the motor parts the past couple days and been pretty busy. Trying to find a truck to borrow to go get some wood for a bench. I'll try to get some more pics up today of everything. Any comments, suggestions, criticism etc. would be appreciated

But I did get something recently that should make things a little easier..



Here's a quick pic that I took yesterday of how the rotors are looking, the other one is almost done as of this moment

Fc3spowa

iTrader: (9)

Here's a few pics of the housings.






I'm going to assume this housing is automaticaly trash, has a chip missing at the spark hole


Does anyone know what this is?


Opinions? The pictures do exaggerate all the marks, none are able to be felt with your finger/nail, in person they look a hell of a lot better. I'm concerned about the burn marks by the exhaust ports and the spark plug holes.

One set is close to a mirror finish, but there are some chatter marks which are justt able to be felt. The other set is completely smooth but has more of a mat finish, it also looks like the exhaust ports were ported

What's also weird is that two of the housings are stamped on the top with a F on one and a R on the other, and the other set, the ones with the 'tags' by the plugs, have nothing.

Fc3spowa

iTrader: (9)

Some more pics

These are the ones with the mirror finish, no 'tags'




And the other set

Fc3spowa

iTrader: (9)

Question. Are the rear B pillar panels different between cars with rear seats and bins? Reason I ask is because the car came with bins but they weren't installed, and looking at it they don't seem like they'd really fit. My B pillar panels have provisions for rear seat belts so I wasn't sure if they were compatible or not

boosted414

iTrader: (30)

the "nickel" that looks like its glued to a housing is an overheat warranty marker. when you overheat the engine that piece comes unglued and falls off, thus voiding warranty

Dliverance

iTrader: (9)

LOL. My grandfather lives in Brooksville. He owns the gas station out on highway 50. "Blanches"

Fc3spowa

iTrader: (9)

Hmm. Is that something that they started doing with rew's? I don't recall any of my fc housings having them. This is my first time with an rew in front of me lol so excuse my ignorance. Also, do all rew housings have them?

No. ****. I live a mile from there. He's cool as hell

Fc3spowa

iTrader: (9)

Any opinions on the housings?

raceratheart15

iTrader: (1)

Looks pretty sweet good luck

Fc3spowa

iTrader: (9)

Thanks

Heading down to Kilo racing this morning to drop off the motors to get prepped


Ordered this tonight


Precision 6266, t4 1.00 divided with a SP cover. Going on a custom mani I have. Next to order is a wg and standalone. Hoping to have the motor done in the next 2 weeks

jacobcartmill

iTrader: (6)

you will love that 6266.
i personally have a 6262 journal bearing, and it is very responsive and makes plenty of power.
i made 320whp at 11psi on a dyno dynamics. yours should have slightly worse response, but more power.

and these turbos sound crazy.

ej20one

Nice build

Fc3spowa

iTrader: (9)

I'm hoping to be in the 450 range. I'm looking for more of a responsive setup then top end high hp.



Thanks!


Now the question is, which standalone..? I have had two microtech lt8s's in FC's and liked them, plus I have a place to have it tuned not far away. But for some reason I'm undecided. Looking at an Adaptronic and also a Haltech ps1000 setup. Opinions?

Fc3spowa

iTrader: (9)

Started mocking the turbo up. I got a custom t4 manifold with the car and was curious how everything would fit. Turns out it's prefect! Still not sure what I'm doing about the wastegate. I have to measure it to see if it's a 50mm or a 44mm. If it's a 44 I might chop off the vband and go twin 38's because I've seen creep issues with the single 44. If it's a 50 I'll probably just keep it how it is.




With the front cover and everything else on, still clears with some room to spare!


I'm getting a ACT stage 3 clutch and XT pressure plate from a buddy of mine for a good deal so that solves my clutch issue. Now I just need to do the fuel system and some other odds and ends and I'll be in bidness

jacobcartmill

iTrader: (6)

that manifold looks terrible. the wastegate runners are coming in at a backward angle. i will be surprised if it doesn't creep.

also, your question about the EMS: definitely haltech. ultimately though, it's really all dependent on who you're having tune it and who you can get local support from. we have a lot of haltechs in my area and i personally have a lot of experience with haltech. the new platinum series are very very nice. they definitely cost more than the adaptronic though.

ZE Power MX6

iTrader: (157)

Is that manifold gonna fit with the wastegate runner like that?

Fc3spowa

iTrader: (9)

I don't know why the one picture stopped working..



Yes, I agree completely. But the manifold was free, so, I guess I can't complain. It is not permanent, I will be building my own manifold in a month or two.

I'm leaning more towards the Haltech. Adaptronic would be nice because of all the features but I'm not sure of many[read: any] people around here that are fluent in them. I know people that can tune Microtechs all day long on rotaries, I just feel like there are better options out there though.

Yes, it clears. It was in the car with a similar sized precision on it before the motor blew a coolant seal


I may just chop off all the wastegate plumping and go twin 38's, that way it can actually be routed correctly

32rulz

good job on the build