Ark's oem minty chaste white build
11-28-16, 12:46 PM
#27
Greddy Vmount
Battery relocated to the trunk
Recaros in
Sakebomb HID kit and Greddy Vmount
Greddy Vmount and Pulleys
I put the meisters on the FC for the time being, I think I'm going to keep them on there instead and get something smaller for the FD.
.
.
01-06-17, 12:06 AM
#33
Took the car to IRP and had them add a new Walbro pump, an HKS twinpower and John Renna tuned it on the powerfc.
Car made great power for stock twins.
366/339 but the best part about a working sequantial system is the almost 300ft of torque at 2700rpm.
The other red line in the 4s is for a set of BNR's they did on another car for comparison
Car made great power for stock twins.
366/339 but the best part about a working sequantial system is the almost 300ft of torque at 2700rpm.
The other red line in the 4s is for a set of BNR's they did on another car for comparison
07-11-17, 02:10 PM
#36
Got rid of the ugly chrome front bumper lights
Reamemiya front stabilizer brace
Finally got wheels Advan GT's in 18x9.5 F and 18x10 R 255/35/18 275/35/18 Michelin Pilot Supers Sports
Super now hub covers and swapped to red Advan stickers
All the Shine Auto stuff is mounted, 99 spec carbon fiber lip, Feed style side skirts, Re-amemiya style rear diffuser and Odula rear wing insert
Currently going through the interior, re-insulating everything, center speaker gauge pod, innovate boost, wideband and coolant gauges, felt tape around all the plastics, goal is to have it solid and rattle free.
Reamemiya front stabilizer brace
Finally got wheels Advan GT's in 18x9.5 F and 18x10 R 255/35/18 275/35/18 Michelin Pilot Supers Sports
Super now hub covers and swapped to red Advan stickers
All the Shine Auto stuff is mounted, 99 spec carbon fiber lip, Feed style side skirts, Re-amemiya style rear diffuser and Odula rear wing insert
Currently going through the interior, re-insulating everything, center speaker gauge pod, innovate boost, wideband and coolant gauges, felt tape around all the plastics, goal is to have it solid and rattle free.
07-11-17, 03:46 PM
#38
I'm looking for ways to have a rattle free interior to and will be interested to see how your adventures goes.
07-12-17, 12:59 PM
#40
https://www.rx7club.com/build-thread...thread-936768/ starts at post 35 if you want ideas.
Thank you
07-12-17, 02:07 PM
#42
Got rid of the ugly chrome front bumper lights
http://i150.photobucket.com/albums/s...Render%206.jpg
http://i150.photobucket.com/albums/s...Render%206.jpg
08-08-17, 12:32 PM
#45
I used plastic weld on anything that was broken or cracked and was salvageable.
Bought some cheap felt tape from Amazon and added it to all the panels I put back.
Replaced all the old crusty clips with new ones.
Added more under carpet insulation under the bins and the floor
Most of my interior rattling came from the middle section where the rear bins are, figured I'd go all out there, biggest pain is that most of the attachment points on my rear bins are broken so figuring now how to redo those.
Bought some cheap felt tape from Amazon and added it to all the panels I put back.
Replaced all the old crusty clips with new ones.
Added more under carpet insulation under the bins and the floor
Most of my interior rattling came from the middle section where the rear bins are, figured I'd go all out there, biggest pain is that most of the attachment points on my rear bins are broken so figuring now how to redo those.
08-10-17, 01:30 PM
#47
Hope to have it finished by the end of the month, progress has been slow as the x5m is being replaced by the new daily and needs to be de-modded and posted for sale.
