Holley Dynamat
#1
Junior Member
Thread Starter
Join Date: Nov 2001
Location: Valparaiso, IN
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Holley Dynamat
Chris, have you
looked at using Holley's new Dynamat in the FD fuel tank to allow us to run safely with less than a quarter tank of fuel?
looked at using Holley's new Dynamat in the FD fuel tank to allow us to run safely with less than a quarter tank of fuel?
#2
Junior Member
Thread Starter
Join Date: Nov 2001
Location: Valparaiso, IN
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
#3
It was only debuted 12/11/14 at PRI and wont be available until some time in 2/2015 Holley Debuts New HydraMat Fuel Reservoir
It looks promising, but they will need come up with some different configurations. https://www.holley.com/products/fuel_systems/hydramat/
It looks promising, but they will need come up with some different configurations. https://www.holley.com/products/fuel_systems/hydramat/
#6
Eats, Sleeps, Dreams Rotary
iTrader: (10)
Pricing released. Anyone try this yet? What shape solution would work best in the FD tank?
https://www.holley.com/products/fuel_systems/hydramat/
https://www.holley.com/products/fuel_systems/hydramat/
Trending Topics
#11
Senior Member
From Holley
Due to the nature of the material that the hydramat is made out of, our testing has shown restriction issues when used with pre-mix oil/gas solutions. The gasoline has no problem passing through the media, but the oil is subject to a filtering effect. This can cause oil starvation issues.
If you have any further questions, please ask.
Thank you,
Keith Jessee
So your pre mix would be screened out and not make it to the motor, better bust out that OMP again if you want to run this...... bummer
Due to the nature of the material that the hydramat is made out of, our testing has shown restriction issues when used with pre-mix oil/gas solutions. The gasoline has no problem passing through the media, but the oil is subject to a filtering effect. This can cause oil starvation issues.
If you have any further questions, please ask.
Thank you,
Keith Jessee
So your pre mix would be screened out and not make it to the motor, better bust out that OMP again if you want to run this...... bummer
#12
From Holley
Due to the nature of the material that the hydramat is made out of, our testing has shown restriction issues when used with pre-mix oil/gas solutions. The gasoline has no problem passing through the media, but the oil is subject to a filtering effect. This can cause oil starvation issues.
If you have any further questions, please ask.
Thank you,
Keith Jessee
So your pre mix would be screened out and not make it to the motor, better bust out that OMP again if you want to run this...... bummer
Due to the nature of the material that the hydramat is made out of, our testing has shown restriction issues when used with pre-mix oil/gas solutions. The gasoline has no problem passing through the media, but the oil is subject to a filtering effect. This can cause oil starvation issues.
If you have any further questions, please ask.
Thank you,
Keith Jessee
So your pre mix would be screened out and not make it to the motor, better bust out that OMP again if you want to run this...... bummer
#13
Full Member
iTrader: (1)
This also would be interesting to know, for the shape of the tank which one would work best with the RX-7? As I also have no working knowledge of the factory pickup system in the rx7, what else would be required as far as plumbing to get this to be a compatible solution with what we currently use?
Thread
Thread Starter
Forum
Replies
Last Post