Alcohol / Meth Injection Tank Location (FD3S)?
#28
Rotary Freak
iTrader: (28)
Join Date: Jun 2009
Location: Ontario, Canada
Posts: 2,089
Likes: 0
Received 0 Likes
on
0 Posts
I just noticed I pasted the wrong link. This one should work
http://imageshack.us/photo/my-images...102600007.jpg/
http://imageshack.us/photo/my-images...102600007.jpg/
#30
Rotary Freak
iTrader: (28)
Join Date: Jun 2009
Location: Ontario, Canada
Posts: 2,089
Likes: 0
Received 0 Likes
on
0 Posts
I use the stock washer tank to fill it. I just tapped the stock location so it would feed that secondary tank. I did it so I could hold more fluid.
I guess the second location holds around 3 litres (around 3/4 of a gallon).
I guess the second location holds around 3 litres (around 3/4 of a gallon).
#33
Urban Combat Vet
iTrader: (16)
I like what Double J did. High capacity but the weight is relatively low and in the center line.
If that's too radical though, how about taking a page from it and use the rear washer tank to fill/re-fill the stock front washer tank? Or if your pump is low, let gravity work and simply link them at a t-fitting just before the pump. Guessing the front holds ~ 2.5 liters and the (USDM) rear about 1.5 liters. That's still a gallon or better.
If that's too radical though, how about taking a page from it and use the rear washer tank to fill/re-fill the stock front washer tank? Or if your pump is low, let gravity work and simply link them at a t-fitting just before the pump. Guessing the front holds ~ 2.5 liters and the (USDM) rear about 1.5 liters. That's still a gallon or better.
#37
Built to race!
iTrader: (8)
I was originally considering using the Euro tank as I was surprised to find my car had one (and no front tank at all), but I wasn't sure where the lowest point was. I decided to go with my second option which was to place my Snow included tank in the driver's side hatch along with the pump. So far so good.
#44
Rotary Newb
iTrader: (10)
This is how I've got my tank and pump. Currently sitting in the spare tire well which was modified with some aluminum welding to make more room. I'd really like to have a custom setup built to round out the trunk with speakers and an amp...some sort of custom setup where just the top of the tank was showing, but could be covered with the rear carpet.