View Full Version : Single Turbo RX-7's
- turbo question
- finally done
- Top tuners in Japan
- So is there anywhere I can find more about spearco intercoolers
- how do u connect the techedge to datalogit?
- fuel question
- Where to get Wastegate clamp?
- looking for a good single set-up
- Streetable Turbo -- How to declare?
- Air Filter Question
- Anther Fuel Question
- Greddy TD06 Question
- what is a faster spooling turbo
- gt35/40 compared to t78
- is gt35/40 comparable to Apexi
- What Fuel Pump, Regulator and Lines to Use?
- apexi avc-r help
- help with wastegate under boosting !!!
- Asking for details, limitations etc, on this Turbo
- Turbo question
- Oil Return line Leak + overheating
- Lets play a game... Name this turbo!
- Help me please
- looking for sigle turbo.
- Aspec GT35/40 Drool shots
- Do I Need To Upfrade Intercooler If I Go Single
- Vert turbo
- Wastegate flow direction question
- So.. it begins. (dailup beware)
- T78 wheel
- Safest boost on 100 octane?
- tubular manifolds
- hav i been shafted?
- Just put HKS TA45CR up for sale...!
- I need a good recommended turbo.Info provided
- who makes that GT35/40
- Ideal AFR's
- Sensing BS, need to know if this is possible.
- Burns Stainless?
- Clipping a GT 35/40?
- whos running a single with stock (non ported) motor?
- Blitz Filter
- to4s question
- dry or wet
- ? about fuel rails
- Custom manifold
- NGK BR9EIX plugs comments
- t04s a ball bearing turbo????
- anyone familiar with a 60-1 or 60-2
- Turbo Oil Feed Location?
- will I need to adjust my Power FC if I go with a single turbo?
- more desirable turbo for street, TD06 or TO4E or S
- GT35/40 true potential (dyno sheets)
- Blitz formula 1 kkk27 single turbo kit
- What should I use?
- are ur bore?? here is a funny 1
- Exhaust Dumps... Yes/No/Maybe So??
- What to look for when picking a turbo
- ? on resistor wiring
- is this possible?
- What are these for...?
- OMP and Single Turbo?
- why in the world did i hit 1.1kg/cm2???
- exhaust suggestions
- exhaust suggestions
- Carb vs Fuel injection
- 86 non-turbo upgrade?
- could my car beat a R6
- help please
- My New Motor/Turbo
- NEED help! HKS wastegate problems???
- NEED Help! HKS wastegate problems???
- J-Tech exhaust mainfold
- Where can I get a divided exhaust gasket?
- HELP! high idle!
- J-port & Turbo - can it be done?
- turbo question
- Help (Symtoms of running on one rotor).
- Isuzu NPR small intercooler
- Got a Greddy Profec Spec II
- what intake do you have??
- MSD 6a...whoa.. searched... now I'm more lost
- FMIC on T2 TB question?
- no sparks to leading coil
- best price for a T66 & manifold (TII)?
- Turbo II Turbo sizing
- Optimum Intake Temps.
- Renesis on the Dyno!! (Pics)!
- HELP! IGNITION OR FUEL PROBLEM or BOTH?
- Boost comes on real late, car seem powerless
- Twins
- Ignition dilema. Help me choose the best ignition setup?
- Fmic, T78, Heat, Help!!!
- 35/40 owners w/ Greddy 2 Row
- wastegate and BOV
- Huge hesitation w/XS engineering t04s turbo!!!
- newbie to turbo, been through whole single turbo section, still no answers!
- DIY wastegate
- .84 hotside... anyone interested?
- gtech comp to street tune with egt,w/b and knock meter
- changing a flange on a SS manifold?
- Best Single Turbo Kit??? Greddy? HKS? Custom?
- Keiths Rails Setup... Q's?
- Blitz SUS Stainless Intake Question
- Were's the cheapest turbo?
- What is the A/R on a turbo, and what does the difference in that number change
- wow the difference betwen cat and presilencer
- sources for detination @ 13psi and up???
- External WG hook up to Boost controller?
- Would this BOV be any good?
- I Think I Hurt My Engine.
- How about Running MSD(1) 6A and MSD(1) DIS 2 ?
- What do you guys think.....
- new to forum...how do you folks feel about the fasttrax T04?
- some gauges
- Can Manifold for Td06 be used with GT 35/40
- T04E help plz!
- What do I need to do this?
- Aeromotive In-tank? (FD)
- Possiable to Change the AR of the exhaust side by changing the housing?
- turboed 12a setup
- base fuel pressure for FPR?
- V-clamps gasket?
- Volvo FMIC
- Abundant oil smoke at startup...
- Urgent!! Need PFC map for SR Stage 2 or similar turbo
- Profec B Spec II issue
- which CFM formula to use for turbo sizing?
- OK to use heater hose for turbo oil drain?
- Starting & Running problems, Help diagnose
- having turbo built
- where to get stainless mandrel bent piping
- Ignition Timing Leading and Trailing?
- water cooling vs. oil cooling
- free flow mass air sensor
- myexhaust gasket is leaking i need help
- profec b spec 2
- 60-1bb or TO4s, which is a better kit
- car stumbles at 4500rpms, someone help!!
- who can build me a turbo
- A few questions about which single turbo to use??
- hks manifold 87-91 turbo II
- 20b cosmo fuel pump
- Just bought a T04E
- Oil Pan Tap for Turbo Oil Return
- IHI Turbo
- T04e conversion write-up
- Open Atmosphere
- Bosch pump install ?s
- anyone make a 60-1 kit
- T03/t04
- turbo spool nhneds to be quicker
- 60-1 specs
- Help Diagnose if blown motor!
- Picking up GT35/40 tomorrow...What else am I going to need
- T04R bigger than a T78?
- Who has the highest rwhp out of a street ported 13B?
- Cheapest place to buy a garret 35/40 kit
- Getting new engine and thinking of going the T51-R route
- Blown motor details
- N/A - Turbo conversion ?'s
- Share how you passed emmissions inspection
- ignition problems! What kind of after market coils are available for FD.
- 500rwhp
- issues installing T66
- How to remove turbo?
- 15psi Dyno Chart, please review.
- TII to a to4eh
- AST mount?
- AN fitting/lines
- World Electronics TBC-1
- Couple of single install Q's...!
- Couple of single install Q's...!
- Has APEXi fixed the wastegate problem?
- No more guessing
- can exh be to free flowing...
- HKS TII manifold on an FD motor??
- HELP...!!! Hot exhaust manifold
- I dont know where to post this, so I try here, FREE stuff
- Installing a MSD 6A on the leading coil?
- Exhaust setup question...
- wastegate?
- oil feed replacement fitting
- dyno
- s5 turbo
- need advise on my fuel setup please
- tell me sothing about the t-78 and gt 35/40.....Please
- I used maps to size turbo, help me out here
- K27 Blitz turbo kit
- Help... avc-r, single turbo.. vacuum hose placement?
- precision turbo
- 12a s5 turbo help
- does anyone have a pic of this....
- need help..
- Help me build a turbo
- What's a better setup for a 3rd gen?
- Pineapple Large Streetport
- if I have this.....
- anyone half bp and gt3540 ?
- single turbo fd vid
- a good Explination of A/R?
- Who can tell me what my turbo is?
- do you guys think I'll be alright with...
- specs on the Apexi RX6 turbo
- how much power from a T04R?
- 12a s5 turbo
- anyone using a weber 48 ida blow throw system
- m2 medium and 35/40
- leaky hks wastegates. . .
- turbos
- what down pipe do i use if i have the garret 35/40
- what down pipe do i use if i have the garret 35/40
- opinions wanted
- Advantage of the single turbo setup?
- 62-1, 68-1?
- 2nd gen leading coil used in a FD (with single t mods)
- SR/kkk stage II, questions. I've searched and searched.
- What wheel is this?
- T-78 questions
- ported motor
- Need ideas for air filter!
- apexi price hike
- new question
- Exhaust manifold options for FC w/60-1
- a 400whp+ buildup... opinions please?
- t78 manifold
- T88 with Ex.housing 15cm2 is ok ??
- Q's on drag car setup
- GT35/40 or T04
- Looking for a T78 manifold
- posibility of bad turbo???
- Single Turbo Decision
- Biggest Turbo On A Rotary
- Greddy Profec B specII???
- going big single couple questions?
- RaceLogic T.C question ?
- t-78 question?!?!?!
- upgrading fuel system for GT 35/40
- GT 35/40 turbo fail?
- Dyno my car
- 850HP single turbo... is it for real?
- i need education.
- What can I do about the upper raditor hose?
- smallest IC feasible for a gt-35/40
- Is $1225 a good deal for a GT35/40 turbo?
- FC Info
- oil line restrictor
- oil restrictor
- moving to single turbo, sizing ?
- how to polish the compressor
|
|
vBulletin® v3.7.5, Copyright ©2000-2010, Jelsoft Enterprises Ltd.