bb6guy

Long story short, i need help!

i ordered the FFE Fuel Kit for RX7, as well as the Xcessive LIM. i am Running 2 x 1000cc ID for primaries, and 4 x 2000cc ID for secondaries, everything fits well except one small issue, the injector clips provided are fine, however to "connect" them to the middle injectors on the secondary fuel rail. is not happening! the clips don't fit.

Does anyone have a photo of there setup running the xcessive LIM and 6 injectors?
or maybe can guide me as to what to do to make this happen?

Thanks

Neutron

iTrader: (10)

Wish I had a picture for you. It is tight but you just need to rotate each injector till all the clips fit. You just need to make sure there is plenty of wire length on each injector pig tail to be able to do this.

13btnos

iTrader: (1)

If the clips are hitting on the fuel rail take a dremel or die grinder with a sanding roll and cut a small bevel on the edge of the fuel rail. I had to do that on my fuel rail for the clips to clear.