AEM Looking For A Map
#1
Looking For A Map
Hey Guys,
I am looking for a map with a street port, T04z, 1000cc Primaries, and 2000cc Secondaries.
I am just looking for something to get my car running so I can get it on the trailer to take it to the turners.
I am also looking for a How-To on how to change the O2 input to an AEM wideband (5v)
I am looking for a map with a street port, T04z, 1000cc Primaries, and 2000cc Secondaries.
I am just looking for something to get my car running so I can get it on the trailer to take it to the turners.
I am also looking for a How-To on how to change the O2 input to an AEM wideband (5v)
#4
Big Bird's Here!!!
iTrader: (26)
the process to get a base map is pretty straight forward.
*Start with the stock twin map and adjust the entire fuel map based on the change in fuel (%). % stock 850 to 2000cc.
*You will also need to sync up the ecu with the stock timing.
*run through all the wizards as this will auto adjust most parameters for a base tune
*You might have to change the AFR the ECU will display to Gasoline. I know mine resets to something else when I wipe the ECU.
The Map lacks a lot when it comes to timing. ArghX can shine some light on that as he is well versed in the stock AEM maps.
*Start with the stock twin map and adjust the entire fuel map based on the change in fuel (%). % stock 850 to 2000cc.
*You will also need to sync up the ecu with the stock timing.
*run through all the wizards as this will auto adjust most parameters for a base tune
*You might have to change the AFR the ECU will display to Gasoline. I know mine resets to something else when I wipe the ECU.
The Map lacks a lot when it comes to timing. ArghX can shine some light on that as he is well versed in the stock AEM maps.
Last edited by ondabirdhouse; 04-23-15 at 08:43 AM.
#5
Thank you ondabirdhouse.
My car already was tuned with my single turbo, I just added an xcessive LIM and change my injectors to 1000cc (from 680 primary) and 2200cc (From 1650 Secondary). I did start it on this map and think I cen get it on the trailer and to the tuner using my existing map.
My car already was tuned with my single turbo, I just added an xcessive LIM and change my injectors to 1000cc (from 680 primary) and 2200cc (From 1650 Secondary). I did start it on this map and think I cen get it on the trailer and to the tuner using my existing map.
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM