Adaptronic Digital Dashes for Select ECU's
#3
Senior Member
iTrader: (1)
Join Date: Jun 2010
Location: Santa Monica
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
Race technology has a branch in the US. I have bough some stuff from them in the past. I put a dash 4 Pro on an AEM EMS. They should be able to sell you products directly or at least send you to someone who can.
Contact us - Racing - Race Technology Ltd - Automotive Technical Excellence
EB Turbo
Contact us - Racing - Race Technology Ltd - Automotive Technical Excellence
EB Turbo
#4
Thanks for that EB! The Race Technology are the ones we sell in Australia.
It used to be that you needed to buy the Adaptronic ECU interface to be able to connect it to the ECU, but we added in the RT output format so that it can output directly to the dash (or one of their loggers). Basically because this allows us to add in more fields that RT didn't want to support.
Here's an instruction on how to do it:
Dash 2 connection, what you need to do
The only other thing you'll need is an Innovate serial cable (part # 3746) and a couple of Male-male adaptors (or a null modem male-male, someone posted a link there to them).
Otherwise, we also output the format for the Motec - I've tested it on the CDL3 and other people have used it directly to log with i2.
We have a board that outputs the Haltech format for the Racepak - but that's got very few parameters; I haven't put a proper price / instructions / etc on that.
AIM apparently have implemented our protocol, so it just needs to connect into our "serial out" and then use the "MODBUS 38400 baud" option (the AIM can't talk our default rate of 57600 baud)
And of course the PLX.
It used to be that you needed to buy the Adaptronic ECU interface to be able to connect it to the ECU, but we added in the RT output format so that it can output directly to the dash (or one of their loggers). Basically because this allows us to add in more fields that RT didn't want to support.
Here's an instruction on how to do it:
Dash 2 connection, what you need to do
The only other thing you'll need is an Innovate serial cable (part # 3746) and a couple of Male-male adaptors (or a null modem male-male, someone posted a link there to them).
Otherwise, we also output the format for the Motec - I've tested it on the CDL3 and other people have used it directly to log with i2.
We have a board that outputs the Haltech format for the Racepak - but that's got very few parameters; I haven't put a proper price / instructions / etc on that.
AIM apparently have implemented our protocol, so it just needs to connect into our "serial out" and then use the "MODBUS 38400 baud" option (the AIM can't talk our default rate of 57600 baud)
And of course the PLX.
#5
Adaptronic has been working on getting the E85 to display on the race techologies dashes! If you have a E440D, PNP or E1280S with a flex fuel sensor you will be able to view it on the dashes soon! This really makes these units a bargain!
Race Technology Display Dashes
We are also stocking these units now!
Race Technology Display Dashes
We are also stocking these units now!
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM