Xcessive mani 2 center injector plugs... 1/4 NPT works!
07-23-15, 09:58 PM
#1
Xcessive mani 2 center injector plugs... 1/4 NPT works!
So, after reading somewhere that the plugs provided by xcessive for the 2 center injector ports tend to find a way to pop out, I did a little brainstorming and test fit a 1/4 npt fitting I had laying around and found that it barely fit on the first thread.
So, I decided to tap the bottom portion of the 2 center injector ports and just plug them with 1/4 npt plugs. Worked like a charm! It did not damage any of the sealing surface so if I want to use 4 injectors in the future I just take the plugs out and done.
Thoughts?
So, I decided to tap the bottom portion of the 2 center injector ports and just plug them with 1/4 npt plugs. Worked like a charm! It did not damage any of the sealing surface so if I want to use 4 injectors in the future I just take the plugs out and done.
Thoughts?
Last edited by neit_jnf; 07-24-15 at 07:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
stickmantijuana
20B Forum
8
08-18-15 02:46 PM
86rxNa
2nd Generation Specific (1986-1992)
2
08-11-15 11:51 AM