TRISPEEDFD3S

iTrader: (26)

Alright, here are some pictures in the daytime since It's not night yet, and I will try and get those pictures tonight. Don't mind the bugs, I got up to norcal last night, and started working on the lights this morning. I just got back from washing the car now too, so here she is!


This is where I hid the three prong male/female light thing that turns on and off the lights.


Driver Side Ballaster


Passenger Side Ballaster


Passenger Lense


Testing The Lights


Got a car wash







Enojy!

7_rocket

iTrader: (6)

Off topic, but are your efini emblems the clear ones or the one with the silver background? And where did you get them?

7_rocket

iTrader: (6)

And on topic, those HID's dont look good at all. I hope the actual lighting is better than what it looks like

existanzrx7

iTrader: (8)

Were on the same page. Hopefully they do look better at night.

GOTBANNED?

From that pic they look like they might be very bluish. but i will hold my judgement till the night shots come. Poeple that have seen mine know that my 4300k is extremely bright and very very white in color.

So i would like to see how this stacks up to mine. BUt lets know ALL forget that pics actually mean nothing when it comes to lighting. It's very hard to capture true lighting with a camera unless your camera cost 5 million dollars!

TRISPEEDFD3S

iTrader: (26)

Very true about the camera thing. These lights are bright, especially if you look into them haha! They are very bluish (which I prefer over white since this is more like a cosmetic mod for me). I feel if I take the reflector off in the housing since the bulb has it's own, then it would be even brighter, but lets wait for night shots. Also, those photos were taken in a very sunny environment. for those who are in the 209 area know how sunny and hot it was today. The emblem is a silver background, and can be purchased through ww.rx7.com.

-Jeff

GOTBANNED?

Hey Jeff sorry i haven't sent the pics as of yet. I am looking for them and seem to have either deleted them or sumthin! ahh but I will send them tonight.

silverTRD

iTrader: (36)

i would like to see some night shots also!

RotaryDreamz

iTrader: (29)

i would like to see some night shots as well.... where in norcal are you located?

TRISPEEDFD3S

iTrader: (26)

I'll be at Mowry Lanes bowling alley in Fremont right now. If you see this in time. Here are the pictures I took. Some look blue, and some look clear. WIERD. I guess it's the focusing of the camera, but it's a bluish look.


Roof shot


Roof shot again


Front shot


Angled front shot


Angled roof shot


Another roof shot


In cabin shot

I'm wondering, did I aim too high? Someone please chime in here. I've actually never aligned the headlights before, so advice is much appreciated.

-Jeff

GoRacer

iTrader: (2)

Yes, they look way off center. Do you have some kind of flat surface with some kind of wall? I did mine in my garage (backed in) and shined them at the neighbors garage accross the alley. It was actually 30' so I compensated. I took a tape measure from the center of the headlight to the neighbors garage door and put a peice of blue tape for my focus spot. You are actually supposed to be slightly to the right also, I think I did 2" to the right. I forgot how high the tape is supposed to be (24"?). You will notice quite a difference once you have them focused correctly. They look really good so far. Looks modern like my F150 lights.

silverTRD

iTrader: (36)

sweet man... i like em'

RotaryDreamz

iTrader: (29)

ahh shoot, i barely saw the message and i went to Mowry lanes at 7:20.... i live like 2 blocks away from Mowry Lanes ( i live on Mission blvd )... i wouldve went inside but i didnt want to just start asking people if that's their FD... BTW, nice car man!! real clean, perfect paint, unlike mine... hope to see you in the near future...

Sean

TRISPEEDFD3S

iTrader: (26)

Sean if you want to stop by in the morning i'm at my cousins house on 1407 hardy place. I'm about a few blocks away from Mowry also. Just me your number and when you want to stop by.

-Jeff

cblake3

iTrader: (2)

Where did you get these lights and how much do they go for?

TRISPEEDFD3S

iTrader: (26)

I got them from Ramy at FDnewbieimports. He is considering doing another GB for those who want them. I paid a total of $696 with shipping from japan and domestic shipping.

-Jeff

TRISPEEDFD3S

iTrader: (26)

So, basically I'm blinding the hell out of people? HAHA!

FDNewbie

iTrader: (10)

Hey Jeff,

Just wanted to stop in, say congrats. Hopefully you're happy w/ 'em. Thanks for the business

~Ramy
FDNewbie Imports

EFS.O

You better put the ballast in a waterproof box like the one here:

http://www.hidplanet.com/covers.html

Moisture will kill the ballasts sooner or later....

XxMerlinxX

iTrader: (2)

What color temp did you get?

TRISPEEDFD3S

iTrader: (26)

6,000K is what it says on the ballasters

Those covers don't fit my ballasters, and also, I don't even know who makes the besiege ballasters. Ramy can you find this out?

-Jeff

FDNewbie

iTrader: (10)

It's unlikely they'll tell me something like that; that's like telling me what sources they use to put their kits together

TRISPEEDFD3S

iTrader: (26)

HAHA! Yeah, you're right. I guess I'll have to get replacements from them through you Ramy. So, if and when my lights go out you're my source. I don't mind getting things like this from japan, and it shouldn't take long since they're not going to have to make it in bulk. I did a quick search online (like 10 different sites) and no ballaster look like mine. Plus, mine is straight plug and play. No cutting what so ever. Thanks Ramy! I love the lights, and guys saying the lenses were just ebay, then ebay should be making a killing. These fit really well. I just have to adjust it like GoRacer said.

-Jeff

FDNewbie

iTrader: (10)

Again, I'm REALLY happy you're happy w/ 'em Jeff And of course, if you ever need anything in the future (replacement parts) or even completely diff parts, you know where to go

Thanks,
~Ramy

TRISPEEDFD3S

iTrader: (26)

Hopefully you guys can hurry up with a vmount! -=Ox