Where to buy a pressure pump/gauge to test a map sensor?
08-19-04, 03:22 PM
#1
Rebreaking things
Thread Starter
Join Date: Jun 2001
Location: 1 foot in Boston 1 in NJ
Posts: 2,586
Likes: 0
Received 0 Likes
on
0 Posts
Where to buy a pressure pump/gauge to test a map sensor?
The cheapest pump I found that produces pressure and has a gauge is $70 through mityvac. Can anybody suggest a more cost effective alternative?
08-19-04, 04:26 PM
#3
RX-7 Bad Ass
iTrader: (55)
The Mityvac vacuum pumps have a pressure port as well as a vacuum port. The gauge only reads vacuum, but you could either a) replace the gauge with a boost/vacuum gauge, or b) T a mechanical vacuum gauge into the line from the pressure port to the MAP sensor.
BTW, the Mityvacs you get at Pep Boys and Autozone for $39 will do the trick.
Dale
BTW, the Mityvacs you get at Pep Boys and Autozone for $39 will do the trick.
Dale
08-19-04, 05:46 PM
#4
Rebreaking things
Thread Starter
Join Date: Jun 2001
Location: 1 foot in Boston 1 in NJ
Posts: 2,586
Likes: 0
Received 0 Likes
on
0 Posts
Thanks a lot guys. Mahjik, I don't know how I missed that post when I searched....really, I did search=). I was planning on buying the plastic pump, but after reading that post I think the 'silverline' is a better choice for me since I want to pressurize my map sensor to at least 15psi.
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
08-22-15 05:52 PM
