Short shifter woes! Retainer broken!
#1
Short shifter woes! Retainer broken!
I've been having on-and-off again shifting woes, and LOTS of broken shiffer bushings.
Turns out, that the black spring-steel retainer/clips are broken.
That is, it's missing the square tab that keep the shifter from moving out of it's pivot.
I'm going to check with Steve at Gotham to see if they have replacement parts, or even B&M.
If you have a short-shiver based upon the B&M design, and you're eating bushings, check this out quickly before you munch 5th gear.
Ugh!!
BTW: attached are pics with the tab circled in red, and note how the other clip is missing BOTH square tabs, and the other one is missing one.
:-( neil
Turns out, that the black spring-steel retainer/clips are broken.
That is, it's missing the square tab that keep the shifter from moving out of it's pivot.
I'm going to check with Steve at Gotham to see if they have replacement parts, or even B&M.
If you have a short-shiver based upon the B&M design, and you're eating bushings, check this out quickly before you munch 5th gear.
Ugh!!
BTW: attached are pics with the tab circled in red, and note how the other clip is missing BOTH square tabs, and the other one is missing one.
:-( neil
#2
RX-7 Bad Ass
iTrader: (55)
And people wonder why I don't like short shifters .
Good that you found the problem, though!
Dale
Good that you found the problem, though!
Dale
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM