Project PP FD.
#1
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Project PP FD.
And I`ll take this first sorry for my shitty english...
I baught a japan imported 94mod FD, just tok out all interior..
Planing on building a Track car of it..
Here is what the car when I got it..
I baught a japan imported 94mod FD, just tok out all interior..
Planing on building a Track car of it..
Here is what the car when I got it..
#2
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Sorry some bad pic, have to order new camera..
Here I have taken of the front end.
Here is just befor i beginning to take the motor out..
The radiator and the cooler is out..
Now the AC radiator is gone too..
Front of motor..
Then after some ******* around i got the motor out and the gearbox of.
I was suprised when I got the gearbox of, there was a HKS tripple or twin clutch on it..
Don`t remember if it was tripple or twin..
Here are pic of the clutch, looks like tripple..
Here I have taken of the front end.
Here is just befor i beginning to take the motor out..
The radiator and the cooler is out..
Now the AC radiator is gone too..
Front of motor..
Then after some ******* around i got the motor out and the gearbox of.
I was suprised when I got the gearbox of, there was a HKS tripple or twin clutch on it..
Don`t remember if it was tripple or twin..
Here are pic of the clutch, looks like tripple..
#3
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Have a order for 2 PP housing from PDF on the forum..
And he has fixed SCR seal for me too, so I don`t have to order that later..
PP housing..
Have much more pic, just have to upload them..
And he has fixed SCR seal for me too, so I don`t have to order that later..
PP housing..
Have much more pic, just have to upload them..
Trending Topics
#10
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by recon fd
whooo those seats may be an issue, but I wish you the best of luck!!!
I just hope i can get them fitted if not I just sell them, and thanx..
#12
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rxmfn7
Where did you buy the P-port housings? I may need a few.
I'll get them from PDF here on the forum, he livs in New Zealand..
I hope to have them here in 2-3 weeks...
Mayby he will build the inlet manifold too, then it will go 4-5 week befor i have them..
#19
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
The PP housing you see here is for an NA sett up..
He sendt me this just so I could see how they were made..
He is making them for a turbo sett up for me..
He sendt me this just so I could see how they were made..
He is making them for a turbo sett up for me..
#20
Wow, overspray! An owner before you must have gotten in a front collision and upon repair forgot that masking tape existed.
Looks like a great project! PP is awesome, I'd love to hear about tuning results.
Looks like a great project! PP is awesome, I'd love to hear about tuning results.
#21
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Corusco
Wow, overspray! An owner before you must have gotten in a front collision and upon repair forgot that masking tape existed.
Looks like a great project! PP is awesome, I'd love to hear about tuning results.
Looks like a great project! PP is awesome, I'd love to hear about tuning results.
It have been in a little collision just befor i got it, but the car is stright so i baught it..
He is not a good painter the on how was masking the car..
But those parts is going of the car and new ones going on...